| 三相磨料射流技术弹药除锈应用研究 |
| |
| 引用本文： | 高岩,王鹏飞,赵晓利.三相磨料射流技术弹药除锈应用研究[J].表面技术,2005,34(5):84-86. |
| |
| 作者姓名： | 高岩 王鹏飞 赵晓利 |
| |
| 作者单位： | 1. 军械工程学院弹药工程系,河北,石家庄,050003
2. 黑龙江省军区装备部,黑龙江,哈尔滨,150001 |
| |
| 摘 要： | 为了改善弹药除锈修理作业环境,提高除锈的效果和效率,促进弹药修理的现代化.在弹药锈蚀原因和危害的基础上,阐述目前弹药除锈方法、存在的缺点和不足.从维修费效比的综合权衡更加合理考虑,提出利用一种新型的弹药除锈方法--三相磨料射流技术弹药除锈,分析三相磨料射流技术弹药除锈的机理、优点、工作原理和设备组成,并通过试验证明三相磨料射流除锈的可行性.得出结论:利用三相磨料射流技术对弹药除锈具有广泛的应用前景.
|
| 关 键 词： | 三相磨料 射流 弹药 除锈 三相磨料射流 射流技术 弹药除锈 应用 研究 Abrasive Water Jet 前景 验证 组成 设备 工作原理 机理 分析 利用 加合 综合 费效比 存在 除锈方法 阐述 |
| 文章编号： | 1001-3660（2005）05-0084-03 |
| 收稿时间： | 2005-07-30 |
| 修稿时间： | 2005-07-30 |
Application of 3-Phase Abrasive Water Jet on Ammunition Rust-removing |
| |
| GAO Yan,WANG Peng-fei,ZHAO Xiao-li.Application of 3-Phase Abrasive Water Jet on Ammunition Rust-removing[J].Surface Technology,2005,34(5):84-86. |
| |
| Authors: | GAO Yan WANG Peng-fei ZHAO Xiao-li |
| |
| Affiliation: | 1. Department of Ammunition Engineering, Ordnance Engineering College, Shijiazhuang 050003, China; 2. Department of Equipment, Heilongjiang Provincial Military Command, Harbin 150001, China |
| |
| Abstract: | In order to improve the condition of ammunition rust-removing, increase the efficiency and effect and promote the modernization of ammunition repair, on the basis of discussing the reasons and endangers on ammunition rust-removing, the methods and techniques of ammunition rusty-removing at present are introduced. The existent disadvantages and shortcomings are analyzed. For the reasonable ratio of repair expenses and effects, the ammunition rusty-removing equipment by 3-phase abrasive water jet is put forward. Then the principle, feasibility, strongpoint,equipment makeup are analyzed. And the feasibility of 3-phase abrasive water jet on ammunition by test is proved. The 3-phase abrasive water jet on ammunition rust-removing has a great potentiality to be widely used. |
| |
| Keywords: | 3-phase abrasive water jet Ammunition Rust-removing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
