| 包钢圆坯铸机生产小方坯工艺试验 |
| |
| 引用本文： | 郭进毅,苗如林,吕文璟,庞智杰,罗海炯,苏红亮,崔立新,杨富强. 包钢圆坯铸机生产小方坯工艺试验[J]. 包钢科技, 2001, 27(4): 12-15 |
| |
| 作者姓名： | 郭进毅 苗如林 吕文璟 庞智杰 罗海炯 苏红亮 崔立新 杨富强 |
| |
| 作者单位： | 包钢(集团)公司炼钢厂,内蒙古,包头,014010;包钢(集团)公司科技处,内蒙古,包头,014010 |
| |
| 摘 要： | 在 12m半径的弧形圆坯铸机上生产 15 0× 15 0mm小方坯 ,且在不改变原铸机的工艺布置与设计的基础上 ,进行工业试验。采用三段工艺冷却 ,通过六个不同水冷工艺参数的调试和三种不同热坯压力的试验 ,优选出了最佳工艺参数 ,成功地在圆坯铸机上生产出了合格的小方坯
|
| 关 键 词： | 圆坯铸机 小方坯 |
| 文章编号： | 1009-5438(2001)04-0012-04 |
Technological testing of square billet produced with round caster at Baotou Steel |
| |
| GUO Jin-yi,MIAO Ru-lin,LV Wen-jing,PANG Zhi-jie,LUO Hai-jiong,SU Hong-liang,CUI Li-xin,YANG Fu-qiang. Technological testing of square billet produced with round caster at Baotou Steel[J]. Science & Technology of Baotou Steel(Group) Corporation, 2001, 27(4): 12-15 |
| |
| Authors: | GUO Jin-yi MIAO Ru-lin LV Wen-jing PANG Zhi-jie LUO Hai-jiong SU Hong-liang CUI Li-xin YANG Fu-qiang |
| |
| Affiliation: | GUO Jin-yi 1,MIAO Ru-lin 2,LV Wen-jing 1,PANG Zhi-jie 1,LUO Hai-jiong 1,SU Hong-liang 1,CUI Li-xin 1,YANG Fu-qiang 1 |
| |
| Abstract: | In condition of the original layout and design of round continuous caster with arc 12m, the billets were produced. The optimized process parameters were chosen and qualified billets were produced through three cooling zone, six different parameters plan and three different hot pressure test. |
| |
| Keywords: | round continuous caster square billet |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
