|
|||||
|
|
| 基于电路网络法的齿轮泵建模 | |
| 引用本文： | 黄蔚,孙昱. 基于电路网络法的齿轮泵建模[J]. 机械工程师, 2011, 0(12): 38-40 |
| 作者姓名： | 黄蔚 孙昱 |
| 作者单位： | 1. 中共陕西省委党校,西安,710061 2. 西安建筑科技大学,西安,710055 |
| 摘 要： | 电路网络法建模是一种通过观察电路图并利用相应的方法就可快速写出系统传递函数形式的数学模型。文中通过将齿轮泵的功率键合图模型转化为等效电路图的形式，利用电路网络法直接写出齿轮泵的传递函数。通过实际的推导证明此种方法快捷、简明。 |
| 关 键 词： | 齿轮泵 电路网络法 功率键合图 建模 |
Modeling of Gear Pump Based on Circuit Network Method |
|
| HUANG Wei,SUN Yu. Modeling of Gear Pump Based on Circuit Network Method[J]. Mechanical Engineer, 2011, 0(12): 38-40 | |
| Authors: | HUANG Wei SUN Yu |
| Affiliation: | 1.Shaanxi Provincial Committee Party School of CPC, Xi＇an 710061, China; 2.Xi＇an University of Architecture and Technology, Xi＇an 710055, China) |
| Abstract: | Modeling of the circuit network is a mathematical model which can rapidly express system transfer function by observing circuit diagram and employing relevant methods. In this paper, the form of equivalent circuit is transformed from the power bond graph of gear pump. Then the transfer function of gear pump is written directly through using the circuit network method. According to actually derivation, it is proved that the method is rapid andsimple. |
| Keywords: | gear pump circuit network method power bond graph modeling |
| 本文献已被 维普 万方数据 等数据库收录！ | |