| Incone1718镍基高温合金的切削性能仿真 |
| |
| 引用本文： | 任和,任家隆,郑庆余,张春燕.Incone1718镍基高温合金的切削性能仿真[J].现代制造工程,2011(11). |
| |
| 作者姓名： | 任和 任家隆 郑庆余 张春燕 |
| |
| 作者单位： | 1. 上海理工大学,上海,200000
2. 江苏科技大学,镇江,212013 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 在考察Inconel718镍基高温合金的化学成分和有关性能的基础上,通过Deform-3D软件对其进行车削仿真,分析影响Inconel718镍基高温合金切削性能的主要因素,给出其最佳的切削速度、进给量和背吃刀量的组合.研究了不同换热系数和刀-屑摩擦因数对Inconel718镍基高温合金切削性能的影响,找到了恰当的冷却润滑方式.
|
| 关 键 词： | Inconel718镍基高温合金 切削性能 Deform-3D软件 仿真 |
The cutting simulation of Inconel718 |
| |
| REN He,REN Jia-long,ZHENG Qing-yu,ZHANG Chun-yan.The cutting simulation of Inconel718[J].Modern Manufacturing Engineering,2011(11). |
| |
| Authors: | REN He REN Jia-long ZHENG Qing-yu ZHANG Chun-yan |
| |
| Affiliation: | REN He1,REN Jia-long2,ZHENG Qing-yu2,ZHANG Chun-yan2(1 Shanghai University of Technology,Shanghai 200000,China,2 Jiangsu University of Science and Technology,Zhenjiang 212013,Jiangsu,China) |
| |
| Abstract: | The chemical composition and properties of nickel-based superalloy Inconel718 was investigated first.Turning Inconel718 was simulated by Deform-3D software to figure out main affection factors,and optimal combination of cutting speed,feed rate and cutting depth was introduced.In addition,different cooling and lubrication methods(heat transfer coefficient of cooling and tool-chip friction factors) for cutting of Inconel718 was studied,and a best cooling and lubrication mode was obtained. |
| |
| Keywords: | Inconel718 cutting characteristic Deform-3D simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
