| 超细搅拌磨机制备高固含量低粘度造纸涂布级重钙浆料的研究 |
| |
| 引用本文： | 肖守孝,张国旺,李自强,赵湘,黄礼龙.超细搅拌磨机制备高固含量低粘度造纸涂布级重钙浆料的研究[J].矿冶工程,2008,28(2):35-39. |
| |
| 作者姓名： | 肖守孝 张国旺 李自强 赵湘 黄礼龙 |
| |
| 作者单位： | 长沙矿冶研究院,湖南,长沙,410012 |
| |
| 基金项目： | 国家自然科学基金，科技部专项基金 |
| |
| 摘 要： | 通过条件试验,系统地研究了超细搅拌磨机中磨矿介质及其尺寸、磨机转速、球料比、分散剂及其用量等主要参数对重钙研磨效果的影响规律,并分析了原因,为工业生产中确定适宜的参数提供了理论依据.同时,应用超细搅拌磨机通过两段研磨试验制备出了-2 μm粒级含量为95.52%、最大粒径为3.08 μm、固含量为75.3%、粘度为290 mPa·s、白度为93.52%的高档造纸涂布级重钙浆料,对工业化大生产具有重要的指导意义.
|
| 关 键 词： | 超细搅拌磨机 高固含量、低粘度 造纸涂布级重钙浆料 |
| 文章编号： | 0253-6099(2008)02-0035-04 |
| 修稿时间： | 2007年8月21日 |
Preparation of High-grade Coating GCC Pulp for Paper-making by Ultrafine Stirring Mill |
| |
| XIAO Shou-xiao,ZHANG Guo-wang,LI Zi-qiang,ZHAO Xiang,HUANG Li-long.Preparation of High-grade Coating GCC Pulp for Paper-making by Ultrafine Stirring Mill[J].Mining and Metallurgical Engineering,2008,28(2):35-39. |
| |
| Authors: | XIAO Shou-xiao ZHANG Guo-wang LI Zi-qiang ZHAO Xiang HUANG Li-long |
| |
| Affiliation: | XIAO Shou-xiao,ZHANG Guo-wang,LI Zi-qiang,ZHAO Xiang,HUANG Li-long(Changsha Research Institute of Mining , Metallurgy,Changsha 410012,Hunan,China) |
| |
| Abstract: | The influence laws of the main parameters of ultrafine stirring mill,such as grinding media and their size,agitation speed,dispersants and their dosage,and the weight ratio of grinding ball to feeding material,on the grinding effect of GCC were investigated and the relevant causations were analyzed by condition experiments,and the results provide a theoretic basis to determine properly the processing parameters for industrial production.After a two stages of grinding,a coating GCC pulp with the content of-2... |
| |
| Keywords: | ultrafine stirred mill high solid content low viscosity coating GCC pulp for paper-making |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
