| 化学镀法制备钯膜工艺 |
| |
| 引用本文： | 郭宇,吴红梅,张雄福,周立岱,李兴洵.化学镀法制备钯膜工艺[J].电镀与涂饰,2011,30(4). |
| |
| 作者姓名： | 郭宇 吴红梅 张雄福 周立岱 李兴洵 |
| |
| 作者单位： | 辽宁工业大学化学与环境工程学院;大连理工大学化工学院精细化工国家重点实验室;伦敦帝国理工学院化学工程学院; |
| |
| 基金项目： | 国家自然科学基金项目(20673017); 中石油科技创新基金项目(2008D-5006-05-06) |
| |
| 摘 要： | 以多孔Al2O3陶瓷管为载体,采用化学镀法制备了钯膜。考察了化学镀温度及载体孔径对制备钯膜的影响,并利用扫描电镜对钯膜形貌结构进行了表征。研究表明,化学镀15min,钯沉积速率较快;反应时间延长至120min,钯沉积量增加,但是沉积速率降低。随着化学镀温度的升高,钯沉积量增加;但是温度过高,会导致钯利用率降低;温度为318K,化学镀钯膜较适宜。在孔径为0.2μm的Al2O3陶瓷管表面制备的钯膜平整、致密,其二次镀钯膜N2渗透速率为1.7×10-9mol/(m2·s·Pa)。
|
| 关 键 词： | 钯膜 化学镀 氢气分离 氧化铝陶瓷管 |
Process of preparation of palladium membrane by electroless plating |
| |
| GUO Yu,WU Hong-mei,ZHANG Xiong-fu,ZHOU Li-dai,LI Xing-xun.Process of preparation of palladium membrane by electroless plating[J].Electroplating & Finishing,2011,30(4). |
| |
| Authors: | GUO Yu WU Hong-mei ZHANG Xiong-fu ZHOU Li-dai LI Xing-xun |
| |
| Affiliation: | GUO Yu,WU Hong-mei,ZHANG Xiong-fu,ZHOU Li-dai,LI Xing-xun School of Chemical and Environmental Engineering,Liaoning University of Technology,Jinzhou 121001,China |
| |
| Abstract: | Pd membranes were prepared on porous Al2O3 ceramic tubes by electroless plating.The effects of temperature and pore size of substrate on the Pd membrane preparation were studied,and the microstructure and morphology of the Pd membrane were characterized by scanning electron microscopy (SEM).The results indicated that the Pd deposition rate is faster when the electroless plating time is 15 min.However,when the reaction time extends to 120 min,the amount of Pd deposit is increased while the deposition rate is... |
| |
| Keywords: | palladium membrane electroless plating hydrogen separation alumina ceramic tube |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
