Free vibration analysis of functionally graded CNT-reinforced nanocomposite beam using Eshelby-Mori-Tanaka approach |
| |
Authors: | M Heshmati M H Yas |
| |
Affiliation: | 1. Department of Mechanical Engineering, Razi University, Kermanshah, Iran 2. Department of Mechanical Engineering, Kermanshah University of Technology, Kermanshah, Iran
|
| |
Abstract: | This work deals with the effect of agglomeration and distribution of carbon nanotube on the free vibration characteristics of a functionally graded nanocomposite beams reinforced by single-walled carbon nanotubes (SWCNTs) by employing an equivalent fiber based on the Eshelby-Mori-Tanaka approach. Different SWCNTs distributions in the thickness directions are introduced to improve fundamental natural frequency of polymer composite beam. The micromechanics models used in the study include a two parameter model of agglomeration. An embedded carbon nanotube in a polymer matrix and its surrounding inter-phase is replaced with an equivalent fiber for predicting the mechanical properties of the carbon nanotube/polymer composite. The system of equations of motion is derived by using the principle of virtual work under the assumptions of the Euler-Bernoulli beam theory. The finite element method is employed to obtain a numerical approximation of the motion equation. Numerical results are presented in both tabular and graphical forms to figure out the effects of nanotube agglomeration, CNTs distribution and boundary conditions on the dynamic characteristics of the beam. The above mentioned effects play very important role on the dynamic behavior of the beam. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|