首页 | 本学科首页   官方微博 | 高级检索  
     

降低过热度对方坯凝固组织的影响
引用本文:杨武,仇圣桃,陶红标,颜慧成,卢军辉,赵沛.降低过热度对方坯凝固组织的影响[J].钢铁,2010,45(2).
作者姓名:杨武  仇圣桃  陶红标  颜慧成  卢军辉  赵沛
作者单位:中国钢研科技集团公司连铸技术国家工程研究中心,北京,100081
基金项目:国家“973计划”项目(2004CB619107)
摘    要:结晶器内钢液过热度的降低可以促进柱状晶向等轴晶的转变和提高等轴晶率,从而有利于铸坯组织的均质化。基于上述原理,设计和制造了可用于降低钢液过热度的冷却水口,并在方坯连铸机上进行了工业试验,分析了低过热度技术对方坯凝固组织的影响。结果表明:采用冷却水口以后,结晶器内钢液过热度的下降幅度可达14℃,铸坯的等轴晶率提高了8%~24%,中心偏析和缩孔严重程度有所降低。

关 键 词:过热度  等轴晶  凝固  偏析  

Effect of Decreasing Superheat Temperature on Solidification Structure of Billet
YANG Wu,QIU Sheng-tao,TAO Hong-biao,YAN Hui-cheng,LU Jun-hui,ZHAO Pei.Effect of Decreasing Superheat Temperature on Solidification Structure of Billet[J].Iron & Steel,2010,45(2).
Authors:YANG Wu  QIU Sheng-tao  TAO Hong-biao  YAN Hui-cheng  LU Jun-hui  ZHAO Pei
Affiliation:National Engineering and Research Center of Continuous Casting Technology;CISRI;Beijing 100081;China
Abstract:The transformation from columnar grain to equiaxed grain would be promoted by decreasing superheat temperature of liquid steel in the mould,which was beneficial for homogenization of billet structure.Based on above-mentioned theory,a cooling nozzle for decreasing superheat temperature was designed and fabricated.Commercial trials were carried out on a billet caster using the cooling nozzle.The effect of the low superheat degree technology on solidification structure of billet was analyzed.The results show t...
Keywords:degree of superheat  equiaxed grain  solidification  segregation  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号