| 万吨级铁基非晶合金原料产业化研究 |
| |
| 引用本文： | 张凤泉,汪汝武,章仲禹.万吨级铁基非晶合金原料产业化研究[J].金属功能材料,2014(1):17-20. |
| |
| 作者姓名： | 张凤泉 汪汝武 章仲禹 |
| |
| 作者单位： | [1]国家硅钢工程技术研究中心,湖北武汉430080 [2]武汉科技大学理学院,湖北武汉430081 [3]南方连铸工程有限公司,江西南昌330200 |
| |
| 基金项目： | 国家863项目（2012AA03A506） |
| |
| 摘 要： | 针对万吨级铁基非晶合金原料供给的重大难题,对底吹电渣感应炉和真空感应钢包精炼炉进行了研究,结果表明:采用2台2t底吹电渣感应炉进行熔炼和一次精炼,1台4t真空感应钢包精炼炉进行二次精炼,能够保证铁基非晶合金的成分精度,而且其产能能够满足万吨级铁基非晶合金生产需要。
|
| 关 键 词： | 铁基非晶合金 原料 底吹电渣感应炉 真空感应钢包精炼炉 |
Study of the Ten Thousand Tons Level Fe-Based Amorphous Alloy Raw Material Industrialization |
| |
| ZHANG Feng-quanI,WANG Ru-wu,＇,ZHANG Zhong-yu.Study of the Ten Thousand Tons Level Fe-Based Amorphous Alloy Raw Material Industrialization[J].Metallic Functional Materials,2014(1):17-20. |
| |
| Authors: | ZHANG Feng-quanI WANG Ru-wu ＇ ZHANG Zhong-yu |
| |
| Affiliation: | 3 (1. National Engineering Research Center for Silicon Steel, Wuhan 430080, Hubei,China; 2. School of Science Wuhan University of Science and Technology, Wuhan 430081, Hubei,China; 3. South Continuous Casting Engineer Co. Ltd, Nanchang 330200,Jiangxi,China) |
| |
| Abstract: | The bottom blowing electroslag induction furnace and the vacuum induction ladle refining furnace were studied for ten thousand tons level Fe-based amorphous alloy raw material supply problems. The results show that using 2 sets of 2 tons level bottom blowing electroslag induction furnace for melting and refining, 1 sets of 4 tons level vacuum induction ladle refining furnace for secondary refining can ensure the composition precision of Fe-based amorphous alloy and its production capacity can meet the ten thousand tons level Fe-based amorphous alloy produc- tion. |
| |
| Keywords: | Fe-based amorphous alloy raw material bottom blowing electroslag induction furnace vacuum induction ladle refining furnace |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
