| 苯乙烯-异戊二烯嵌段聚合物热熔压敏胶性能影响因素探讨 |
| |
| 引用本文： | 张红星,周晓山.苯乙烯-异戊二烯嵌段聚合物热熔压敏胶性能影响因素探讨[J].精细化工中间体,2007,37(4):48-49,58. |
| |
| 作者姓名： | 张红星 周晓山 |
| |
| 作者单位： | 巴陵石化有限责任公司合成橡胶事业部,湖南,岳阳,414014 |
| |
| 摘 要： | 用不同种类增粘树脂、不同牌号苯乙烯-异戊二烯嵌段聚合物(简称SIS)制备SIS热熔压敏胶,考察不同种类增粘树脂、不同牌号SIS及萜烯树脂含量对SIS热熔压敏胶性能的影响,结果表明:萜烯树脂是改性SIS热熔压敏胶适宜的增粘树脂,当萜烯树脂在SIS热熔压敏胶中含量达50%时,SIS热熔压敏胶性能较佳,随不同牌号SIS中两嵌段SI含量的增加,SIS热熔压敏胶的剥离强度有所增加,持粘力有所下降。
|
| 关 键 词： | 增粘树脂 SIS热熔压敏胶 萜烯树脂 |
| 文章编号： | 1009-9212（2007）04-0048-02 |
| 修稿时间： | 2007-06-04 |
Study of Influencing Factor on the Properties of SIS Hot- melt Pressure Sensitive Adhesive |
| |
| ZHANG Hong-xing,ZHOU Xiao-shan.Study of Influencing Factor on the Properties of SIS Hot- melt Pressure Sensitive Adhesive[J].Fine Chemical Intermediates,2007,37(4):48-49,58. |
| |
| Authors: | ZHANG Hong-xing ZHOU Xiao-shan |
| |
| Affiliation: | Synthetic Rubber Business Department of Baling Petrochemical Co., Ltd., Yueyang 414014, China |
| |
| Abstract: | In this paper,styrene-isoprene-styrene block copolymer(SIS) hot-melt pressure sensitive adhesive(HMPSA) was prepared using different kinds of tackifying resins and SIS. Effects of tackifying resins,SIS and the amount of terpene-resin on the properties of SIS HMPSA were studied. The results showed that terpene-resin was a suitable tackifying resin to modify SIS hot-melt pressure sensitive adhesive. When the content of terpene resin in SIS HMPSA reached to 50%,the properties were better. AS the content of SI diblock in SIS increased,the peeling strength of SIS HMPSA increased,but constant adhesion decreased. |
| |
| Keywords: | tackifying resin SIS hot-melt pressure sensitive adhesive terpene resin |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
