| 液锻连挤硅线石粒子/铝复合材料的摩擦磨损行为 |
| |
| 引用本文： | 陈威,罗守靖.液锻连挤硅线石粒子/铝复合材料的摩擦磨损行为[J].中国有色金属学报,2004,14(2):238-243. |
| |
| 作者姓名： | 陈威 罗守靖 |
| |
| 作者单位： | 1. 中国人民解放军装甲兵工程学院,机械工程系,北京,100072;江苏法尔胜集团公司,江阴,214433
2. 哈尔滨工业大学,材料科学与工程学院,哈尔滨,150001 |
| |
| 基金项目： | 国家自然科学基金，黑龙江省自然科学基金 |
| |
| 摘 要： | 采用液锻连挤成形工艺获得了一种新型硅线石颗粒增强LY12铝基复合材料,其性能可与常规热挤压件媲美.摩擦磨损性能测试表明:硅线石颗粒增强铝基复合材料具有优良的摩擦磨损性能,且其耐磨性能随粒子体积分数增加而增加.材料经液锻连挤后,硅线石粒子在强大三向压应力作用下嵌镶于基体内,粒子很难拉脱,承受摩擦力的作用时,硅线石粒子起支承作用,粒子硬度高,故使复合材料整体耐磨性能提高.
|
| 关 键 词： | 液锻连挤 复合材料 摩擦磨损 硅线石 铝合金 |
| 文章编号： | 1004-0609(2004)02-0238-06 |
| 修稿时间： | 2003年5月18日 |
Friction characteristics of sillimanitep/LY12 composites manufactured by liquid forging catching up through extrusion |
| |
| CHEN Wei.Friction characteristics of sillimanitep/LY12 composites manufactured by liquid forging catching up through extrusion[J].The Chinese Journal of Nonferrous Metals,2004,14(2):238-243. |
| |
| Authors: | CHEN Wei |
| |
| Abstract: | By using liquid forging catching up by extrusion technique, a new sillimanite particle reinforced LY12 aluminum alloy composite is produced, which has the similar properties as those of hot-extrusion product. Measurement of tribological properties reveals that the friction and wear properties of the composites are improved greatly, and the wear-resisting properties increase with increasing particle volume fraction of sillimanite. By this extrusion technique, the sillimanite particles are inlaid into the matrix by strong three-direction pressing stress, in which it is hard to pull out. When being acted on by a friction, the sillimanite particles give support to the matrix, thus high wear-resisting properties are obtained. |
| |
| Keywords: | liquid forging catching up by extrusion friction and wear sillmanite aluminum alloy |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
