| 高速硬车削淬火钢的实验研究 |
| |
| 引用本文： | 张燕敏,徐宏海.高速硬车削淬火钢的实验研究[J].中国制造业信息化,2006,35(3):54-57. |
| |
| 作者姓名： | 张燕敏 徐宏海 |
| |
| 作者单位： | 北方工业大学机电工程学院,北京100041 |
| |
| 基金项目： | 北京市教育委员会科技发展计划重点项目（KE200510009007） |
| |
| 摘 要： | 通过改变高速车削淬火钢（Cr12）的切削用量，对切削力、切削温度、加工表面质量等进行了研究，结果表明合理选择切削用量，高速硬车削淬火钢可显著提高生产率及加工表面质量，并在一定程度上可取代磨削加工。
|
| 关 键 词： | 高速硬车削 陶瓷刀具 淬火钢 切削力 表面粗糙度 |
| 收稿时间： | 2005-10-18 |
The Experimental Study on High Speed Dry Turning Hardened Steel |
| |
| ZHANG Yan- min, XU Hong - hai.The Experimental Study on High Speed Dry Turning Hardened Steel[J].Manufacture Information Engineering of China,2006,35(3):54-57. |
| |
| Authors: | ZHANG Yan- min XU Hong - hai |
| |
| Affiliation: | North China University of Technology, Beijing, 100041, China |
| |
| Abstract: | It describes the cutting experiments for study of the variation of turning force, cutting temperature and surface roughness, these experiments are designed with different cutting parameters in high speed dry turning hardened steel by the ceramic cutter. The experimental results show that high speed dry turning hard- ened steel with the ceramic cutter is able to raise productivity and improve surface roughness greatly, which can replace grinding in rome occasions. |
| |
| Keywords: | High Speed Dry Turning Ceramic Cutter Hardened Steel Turning Force Surface Roughness |
| 本文献已被 维普 等数据库收录！ |
