首页 | 本学科首页   官方微博 | 高级检索  
     

实体膨胀管膨胀力影响因素数值模拟
引用本文:梁坤,练章华,任荣坤,丁亮亮,魏臣新. 实体膨胀管膨胀力影响因素数值模拟[J]. 石油矿场机械, 2010, 39(12): 1-4
作者姓名:梁坤  练章华  任荣坤  丁亮亮  魏臣新
作者单位:西南石油大学油气藏地质及开发工程国家重点实验室;
摘    要:
根据弹塑性有限元理论,建立了膨胀套管膨胀所需膨胀液压力与摩擦因数、膨胀率、膨胀锥锥角的非线性接触的有限元力学模型。通过所建模型的求解,对膨胀液压力的影响因素进行了深入研究,并定量分析了摩擦因数、膨胀率、膨胀锥锥角对膨胀力的影响规律。研究表明:在其他条件相同的情况下,膨胀液压力随摩擦因数或膨胀膨胀幅度增加而线性增大,随膨胀锥角的增大,膨胀液压力呈现先减小后增大的规律。此研究为膨胀工艺的设计提供了理论参考。

关 键 词:膨胀套管  膨胀液压力  膨胀幅度  膨胀锥锥角  摩擦因数

Numerical Approaching to Prediction of Expansion for Solid Expandable Tubules
LIANG Kun,LIAN Zhang-hua,REN Rong-kun,DING Liang-liang,WEI Chen-xin. Numerical Approaching to Prediction of Expansion for Solid Expandable Tubules[J]. Oil Field Equipment, 2010, 39(12): 1-4
Authors:LIANG Kun  LIAN Zhang-hua  REN Rong-kun  DING Liang-liang  WEI Chen-xin
Affiliation:LIANG Kun,LIAN Zhang-hua,REN Rong-kun,DING Liang-liang,WEI Chen-xin(State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu 610500,China)
Abstract:
According to FEM theory,a non-linear FEM contact analyses model which hydraulic driving force,friction coefficient,expansion rate and cone angle of solid expandable tubular(SET) was established.The result solved by this model is consistent with that measured in the test,and quantitative analysis of the friction coefficient,expansion rate,expansion cone angle of the hydraulic driving force of law.Research suggests that in other conditions being equal,only change the friction coefficient,expansion rate,expans...
Keywords:expandable tubular  hydraulic driving force  expansion rate  cone angle  friction coefficient  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号