首页 | 本学科首页   官方微博 | 高级检索  
     

转子支座松动故障的数值仿真与实验研究
引用本文:毛居全,李朝峰,王得刚,闻邦椿. 转子支座松动故障的数值仿真与实验研究[J]. 机械与电子, 2008, 0(3): 3-6
作者姓名:毛居全  李朝峰  王得刚  闻邦椿
作者单位:东北大学机械工程与自动化学院,辽宁,沈阳,110004;东北大学机械工程与自动化学院,辽宁,沈阳,110004;东北大学机械工程与自动化学院,辽宁,沈阳,110004;东北大学机械工程与自动化学院,辽宁,沈阳,110004
摘    要:
根据工程实际情况,建立了轴承座地脚螺栓松动的力学模型, 采用Adiletta提出的非线性油膜力模型,利用Runge-Kutta数值积分方法进行数值仿真.最后利用转子模型实验台,对支座松动故障进行实验研究,采用三维瀑布图、轴心轨迹图和小波尺度图对故障信号进行了分析研究.

关 键 词:旋转机械  机座松动故障  数值仿真  小波尺度图  实验研究
文章编号:1001-2257(2008)03-0003-04
收稿时间:2007-11-08
修稿时间:2007-11-08

Numerical Simulation and Experimental Research on Pedestal Looseness of a Rotor
MAO Ju-quan,LI Chao-feng,WANG De-gang,WEN Bang-chun. Numerical Simulation and Experimental Research on Pedestal Looseness of a Rotor[J]. Machinery & Electronics, 2008, 0(3): 3-6
Authors:MAO Ju-quan  LI Chao-feng  WANG De-gang  WEN Bang-chun
Abstract:
Abstract. The mechanical model of looseness of anchor bolt on the bearing support was set up based on the project practice. Using the nonlinear oil- film model put forward by Adiletta, the dy- namic characteristics were investigated by numeri- cal Runge - Kutta method. At last, the experiment was made to investigate the pedestal looseness by model test rig and the fault signals were analyzed by the 3D waterfall spectra, trajectory and wavelet scalogram.
Keywords:rotating machinery   pedestal looseness faults   numerical simulation   wavelet scalogram   experiment research
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号