Structural,mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering

Niobium-carbide nanocomposite coatings with a carbon content varying from 43 to 64 at.% were deposited by dual DC magnetron sputtering. X-ray diffraction, x-ray photoelectron spectroscopy and electron microscopy showed that all coatings consisted of nanometer sized NbC grains embedded in a matrix of amorphous carbon. Mechanical properties and electrical resistivity showed a strong dependency on the amount of amorphous carbon (a-C) and NbC grain size in the coating. The highest hardness (23 GPa), elastic modulus (295 GPa) and the lowest resistivity (260 μΩ cm) were measured for the coating with about 15% of a-C phase. Contact resistance measurements using a crossed cylinder set-up showed lowest contact resistance for the coating containing 33% a-C (140 μΩ at a contact force of 100 N), which is comparable to a Ag reference (45 μΩ at a contact force of 100 N). Comparison with TiC-based nanocomposites studied under similar conditions showed that the NbC system has less tendency to form a-C and that lowest contact resistance is obtained at comparable amounts of a-C phase in both material systems (33% for NbC compared to 35% for TiC). With these good electrical contact properties, the NbC nanocomposites can be considered as a potential material for electrical contact applications.