| 仿生叠层复合材料的制备及层间性能研究 |
| |
| 引用本文： | 郑丽娟,赵玉涛,程晓农,陈志刚.仿生叠层复合材料的制备及层间性能研究[J].机械工程材料,2003,27(7):35-37,54. |
| |
| 作者姓名： | 郑丽娟 赵玉涛 程晓农 陈志刚 |
| |
| 作者单位： | 江苏大学材料科学与工程学院,江苏,镇江,212013 |
| |
| 基金项目： | 江苏省自然科学基金(BK99111) |
| |
| 摘 要： | 把贝壳的结构机制及韧化机理应周于叠层复合材料的设计中。利用铝合金作为基体材料，纤维／树脂作为夹层材料，设计并制备了纤维／树脂／铝合金叠层复合材料。通过扫描电镜从微观上对复合材料的界面进行研究，指出成型工艺对复合材料界面的影响。通过T剥离强度试验对叠层复合材料的界面粘接强度进行测试，在宏观上对复合材料的层间性能进行了分析。
|
| 关 键 词： | 仿生叠层复合材料 界面粘接强度 层间性能 微观结构 生物材料 |
| 文章编号： | 1000-3738(2003)07-0035-03 |
Preparation of Biomimetic Laminated Composites and their Interlayer Performance |
| |
| ZHENG Li-juan,ZHAO Yu-tao,CHENG Xiao-nong,CHEN Zhi-gang.Preparation of Biomimetic Laminated Composites and their Interlayer Performance[J].Materials For Mechanical Engineering,2003,27(7):35-37,54. |
| |
| Authors: | ZHENG Li-juan ZHAO Yu-tao CHENG Xiao-nong CHEN Zhi-gang |
| |
| Abstract: | The structure and toughened mechanisms of nacreous layer were introduced to design the laminated composites. By using aluminum alloy as the base material and fiber/resin as the interlaminar material, the fiber/res-in/aluminum alloy laminated composites were prepared. The cross-sectional micrograph of the interface was studied. It was found that the twice pressure processing is much more favorable than the once pressure processing. The interface strength was measured through the peeling strength experiment. The interlayer performance was analyzed. |
| |
| Keywords: | laminated composite interface interlayer performance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
