首页 | 本学科首页   官方微博 | 高级检索  
     

2,6-二甲基哌嗪合成新工艺
引用本文:刘荣杰,张瑞明,杜俊豪,陈彪.2,6-二甲基哌嗪合成新工艺[J].化学工程,2010,38(11).
作者姓名:刘荣杰  张瑞明  杜俊豪  陈彪
基金项目:西安市产学研合作工程--工业应用研发项目
摘    要:以1,2-丙二胺为原料气固相催化合成2,6-二甲基哌嗪,对实验用Cu-Cr-Fe/γ-Al2O3催化剂进行制备与考察,实验所确定的最佳工艺条件为:原料液1,2-丙二胺的质量分数40%,反应温度320℃,空速490.74 h-1,结果表明:采用Cu-Cr-Fe/γ-Al2O3为催化剂,以1,2-丙二胺为原料合成2,6-二甲基哌嗪的工艺路线是可行的,在最佳工艺条件下,1,2-丙二胺的转化率为98.84%,2,6-二甲基哌嗪的收率为88.62%。

关 键 词:2  6-二甲基哌嗪  Cu-Cr-Fe/-γAl2O3  催化剂  合成

Novel process for synthesis of 2,6-dimethypiperazine
LIU Rong-jie,ZHANG Rui-ming,DU Jun-hao,CHEN Biao.Novel process for synthesis of 2,6-dimethypiperazine[J].Chemical Engineering,2010,38(11).
Authors:LIU Rong-jie  ZHANG Rui-ming  DU Jun-hao  CHEN Biao
Abstract:With 1,2-propanediamine as raw material,the gas-solid catalytic synthesis of 2,6-dimethypiperazine was performed,and the Cu-Cr-Fe/γ-Al2O3 catalyst for experiment was prepared and investigated.The optimum process conditions were as follows: 1,2-propanediamine mass fraction 40%,reaction temperature 320 ℃,space velocity 490.74 h-1.The result shows that the synthesis process route is feasible with Cu-Cr-Fe/γ-Al2O3 as catalyst and 1,2-propanediamine as raw material.Under the optimum process conditions,the conversion of 1,2-propanediamine reaches 98.84%,the yield of 2,6-dimethypiperazine reaches 88.62%.
Keywords:2  6-dimethypiperazine  Cu-Cr-Fe/γ-Al2O3  catalyst  synthesis
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号