| 电火花线切割加工中断丝后的有效工艺处理 |
| |
| 引用本文： | 王冬生,贾宝贤,王春明.电火花线切割加工中断丝后的有效工艺处理[J].电加工与模具,2007(Z1):45-47. |
| |
| 作者姓名： | 王冬生 贾宝贤 王春明 |
| |
| 作者单位： | 1. 哈尔滨工业大学(威海)汽车工程学院,山东威海,264209
2. 山东威海海马地毯厂,山东威海,264200 |
| |
| 摘 要： | 给出了DK7740E数控电火花线切割机加工过程中出现断丝故障后的几种相应措施,对指导实际的线切割加工工艺过程具有积极的指导意义.
|
| 关 键 词： | 线切割加工 断丝 工艺措施 |
| 修稿时间： | 2007年1月8日 |
The Processing Methods Dealing with the Wire Breakage of WEDM |
| |
| Wang Dongsheng,Jia Baoxian,Wang Chunming.The Processing Methods Dealing with the Wire Breakage of WEDM[J].Electromachining & Mould,2007(Z1):45-47. |
| |
| Authors: | Wang Dongsheng Jia Baoxian Wang Chunming |
| |
| Affiliation: | 1. Harbin Institute of University (Weihai |
| |
| Abstract: | When the WEDM processing was taken place on the DK7740E NC machine tools, several processing methods dealing with the wire breakage of WEDM had been given in this paper. These methods can instruct practical application in WEDM. |
| |
| Keywords: | WEDM wire breakage processing method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
