| 锌铝合金和铝青铜摩擦磨损特性的研究 |
| |
| 引用本文： | 林吉曙,沈保罗.锌铝合金和铝青铜摩擦磨损特性的研究[J].润滑与密封,1996(6):24-27. |
| |
| 作者姓名： | 林吉曙 沈保罗 |
| |
| 作者单位： | [1]成都纺织高等专科学校 [2]四川联合大学 |
| |
| 摘 要： | 研究了锌铝合金ＺＡ－Ｓｉ和铝青铜ＺＣｕＡｌ１０Ｆｅ３在２０号机油润滑条件下的摩擦磨损特性。结果表明：在一定的条件下，ＺＡ－Ｓｉ合金的耐磨性能和磨合性能均明显优于ＺＣｕＡｌ１０Ｆｅ３合金；二种合金的磨损机制主要是犁削，辗压和粘着，ＺＡ－Ｓｉ合金的粘着磨损具有延缓性和失效性的双重特性。
|
| 关 键 词： | 锌铝合金 铝青铜 摩擦磨损特性 磨损机理 |
Study on Friction-Wear Performances of Zn-Al Alloy and Albronze |
| |
| Lin Jishu.Study on Friction-Wear Performances of Zn-Al Alloy and Albronze[J].Lubrication Engineering,1996(6):24-27. |
| |
| Authors: | Lin Jishu |
| |
| Abstract: | Friction-wear performances of Zn-Al alloy (ZA-Si) and Albronze (ZCuA110Fe3) lubricated by 20# machine oil have been researched. The results show that abrasion resistance and run-in of Za-Si alloy are superior to those of ZCuA110Fe3 alloy under certain conditions, and the wear mechanism of the alloy are mainly plough cut, roller compaction and adhesion. The adhesive wear of ZA-Si alloy possesses a double character, i.e. the wear being decreased or increased. The material transfer and oxide film in friction surface may influence the friction-wear performances to certain extant. |
| |
| Keywords: | Zn-Al Alloy Albronze Friction-Wear Performace Wear Mechanism Abrasion Resistance |
| 本文献已被 CNKI 维普 等数据库收录！ |
