| 预制块制备对挤压铸造SiCW／ZM5复合材料性能的影响 |
| |
| 引用本文： | 郑明毅 吴昆. 预制块制备对挤压铸造SiCW／ZM5复合材料性能的影响[J]. 中国有色金属学报, 1998, 8(4): 605-610 |
| |
| 作者姓名： | 郑明毅 吴昆 |
| |
| 作者单位： | 哈尔滨工业大学材料科学与工程学院 |
| |
| 基金项目： | 国家自然科学基金,黑龙江省自然科学基金 |
| |
| 摘 要： | 制备了含不同粘结剂的ＳｉＣ晶须预制块，并采用挤压铸造法制备出含不同粘结剂的ＳｉＣｗ／ＺＭ５镁基复合材料，对其组织结构和力学性能进行了研究。结果表明，采用含酸性磷酸铝粘结剂制备的ＳｉＣｗ／ＺＭ５镁基复合材料的性能最佳，这可能和粘结剂与晶须以及基体合金的界面反应有关
|
| 关 键 词： | 碳化硅晶须 镁合金 复合材料 预制块 粘结剂 制备工艺 性能 |
FABRICATION OF PREFORM AND ITS EFFECT ON PROPERTIES OF SiC w/ZM5 MAGNESIUM MATRIX COMPOSITES |
| |
| Zheng Mingyi,Wu Kun,Zhang Wei,Zhao Min,Yao Zhongkai and Zhao Liancheng School of Materials Science and Engineering,Harbin Institute of Technology,Harbin ,P. R. China. FABRICATION OF PREFORM AND ITS EFFECT ON PROPERTIES OF SiC w/ZM5 MAGNESIUM MATRIX COMPOSITES[J]. The Chinese Journal of Nonferrous Metals, 1998, 8(4): 605-610 |
| |
| Authors: | Zheng Mingyi Wu Kun Zhang Wei Zhao Min Yao Zhongkai Zhao Liancheng School of Materials Science Engineering Harbin Institute of Technology Harbin P. R. China |
| |
| Affiliation: | Zheng Mingyi,Wu Kun,Zhang Wei,Zhao Min,Yao Zhongkai and Zhao Liancheng School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,P. R. China |
| |
| Abstract: | Several kinds of SiC whisker preforms with different binders were prepared, SiC w/ZM5 magnesium matrix composites from different preforms were fabricated with squeeze casting method, the microstructure and mechanical properties of the composites were studied. The results show that the SiC w/ZM5 magnesium matrix composites with acid phosphate binder obtained the best mechanical properties, which may be due to the reaction between the binder and whisker and matrix alloy. |
| |
| Keywords: | SiC whisker magnesium alloy composites preform binder fabrication properties |
| 本文献已被 CNKI 维普 等数据库收录！ |
