| 螺旋升角对滚珠丝杠副弹性变形及传递效率的影响 |
| |
| 引用本文： | 芮执元,韩新健,郭俊锋.螺旋升角对滚珠丝杠副弹性变形及传递效率的影响[J].机械设计,2011,28(11). |
| |
| 作者姓名： | 芮执元 韩新健 郭俊锋 |
| |
| 作者单位： | 1. 兰州理工大学数字制造技术与应用省部共建教育部重点实验室,甘肃兰州730050;兰州理工大学机电工程学院,甘肃兰州730050
2. 兰州理工大学数字制造技术与应用省部共建教育部重点实验室,甘肃兰州730050;兰州理工大学机电工程学院,甘肃兰州730050;山西煤矿机械制造有限责任公司,山西太原030031 |
| |
| 基金项目： | 国家重大科技专项资助项目(2009ZX04001) |
| |
| 摘 要： | 针对高速数控机床采用的大导程滚珠丝杠副对进给系统性能影响问题,考虑螺旋升角、滚珠与滚道接触面的滑动和滚动摩擦,研究了滚珠丝杠副的轴向弹性变形,利用有限元方法进行了仿真分析;建立了丝杠由转动到直线进给运动的传递效率数学模型,并利用实验进行了验证。结果表明,随着螺旋升角的增大,丝杠副的传递效率提高,轴向弹性变形减小,轴向力减小,提高了轴向定位精度。
|
| 关 键 词： | 滚珠丝杠副 弹性变形 传递效率 有限元 |
Influence on elastic deformation and transmission efficiency of ball screw pairs by lead angle |
| |
| RUI Zhi-yuan,HAN Xin-jian,GUO Jun-feng.Influence on elastic deformation and transmission efficiency of ball screw pairs by lead angle[J].Journal of Machine Design,2011,28(11). |
| |
| Authors: | RUI Zhi-yuan HAN Xin-jian GUO Jun-feng |
| |
| Affiliation: | RUI Zhi-yuan,HAN Xin-jian,GUO Jun-feng(1.Key Laboratory of Digital Manufacturing Technology and Application,The Ministry of Education,Lanzhou University of Technology,Lanzhou 730050,China,2.School of Mechanical and Electronic Engineering,3.Shanxi Coal Mine Manufactnring Co.,030031) |
| |
| Abstract: | Concerning the impact on the feeding system performance by the large lead ball screw pair used in high-speed NC machine tools,and by taking the lead angle as well as sliding and rolling frictions on the contact surface between balls and race into consideration,the axial elastic deformation of ball screw pair was analyzed.The simulation and analysis were carried out by applying finite element method.The mathematical model of transmission efficiency for the screw from rotation to linear motion was established... |
| |
| Keywords: | ball screw pair elastic deformation transmission efficiency finite element |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
