Effects of inlet relative humidity (RH) on the performance of a high temperature-proton exchange membrane fuel cell (HT-PEMFC)

A high temperature-proton exchange membrane fuel cells (HT-PEMFC) based on phosphoric acid (PA)-doped polybenzimidazole (PBI) membrane is able to operate at elevated temperature ranging from 100 to 200 °C. Therefore, it is evident that the relative humidity (RH) of gases within a HT-PEMFC must be minimal owing to its high operating temperature range. However, it has been continuously reported in the literature that a HT-PEMFC performs better under higher inlet RH conditions. In this study, inlet RH dependence on the performance of a HT-PEMFC is precisely studied by numerical HT-PEMFC simulations. Assuming phase equilibrium between membrane and gas phases, we newly develop a membrane water transport model for HT-PEMFCs and incorporate it into a three-dimensional (3-D) HT-PEMFC model developed in our previous study. The water diffusion coefficient in the membrane is considered as an adjustable parameter to fit the experimental water transport data. In addition, the expression of proton conductivity for PA-doped PBI membranes given in the literature is modified to be suitable for commercial PBI membranes with high PA doping levels such as those used in Celtec^® MEAs. Although the comparison between simulations and experiments shows a lack of agreement quantitatively, the model successfully captures the experimental trends, showing quantitative influence of inlet RH on membrane water flux, ohmic resistance, and cell performance during various HT-PEMFC operations.