首页 | 本学科首页   官方微博 | 高级检索  
     

接枝丙烯酸聚乙烯表面诱导生成硫化镉及其形貌研究
引用本文:陈爽,侯铮迟,张凤英.接枝丙烯酸聚乙烯表面诱导生成硫化镉及其形貌研究[J].辐射研究与辐射工艺学报,2007,25(1):47-50.
作者姓名:陈爽  侯铮迟  张凤英
作者单位:中国科学院上海应用物理研究所,上海,201800
摘    要:分别以体积比为1∶1的异丙醇/水、甲醇/水混合溶剂作为接枝溶剂,通过调节丙烯酸单体浓度得到不同接枝率和不同表面接枝链分布的接枝膜,用接枝膜诱导形成了不同形貌特征的硫化镉.研究表明,接枝率越大,硫化镉在聚乙烯接枝膜表面的分布越密集;与甲醇/水为混合接枝溶剂相比,在异丙醇/水为混合接枝溶剂的接枝膜上的硫化镉颗粒分布比较均匀.

关 键 词:聚乙烯  丙烯酸  辐射接枝  硫化镉
收稿时间:2006-11-15
修稿时间:2006-12-12

Cadmium sulfide formation on acrylic acid-grafted polyethylene and the morphology affected by the grafting
CHEN Shuang,HOU Zhengchi,ZHANG Fengying.Cadmium sulfide formation on acrylic acid-grafted polyethylene and the morphology affected by the grafting[J].Journal of Radiation Research and Radiation Processing,2007,25(1):47-50.
Authors:CHEN Shuang  HOU Zhengchi  ZHANG Fengying
Affiliation:Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800
Abstract:Cadmium sulfide (CdS) formation on low density polyethylene film (LDPE) grafted with acrylic acid (AAc) was attempted. Films with different degrees of grafting and grafting chain distributions were obtained by using isopropanol/water or methanol/water (volume ratio: 1:1) as grafting solvents respectively and adjusting the monomer concentrations. Different morphologies of CdS were induced on the grafted films. The results indicated that CdS par- ticles grew faster and distributed more thickly on films with higher degrees of grafting. CdS particles formed on films grafted in isopropanol/water system distributed more uniformly than in the methanol/water system.
Keywords:Polyethylene  Acrylic acid  Radiation grafting  Cadmium sulfide
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号