首页 | 本学科首页   官方微博 | 高级检索  
     

回流式无级变速器动力连续转换的控制策略仿真研究
引用本文:孙冬野,尹燕莉,郝允志,林歆悠,刘永刚.回流式无级变速器动力连续转换的控制策略仿真研究[J].中国机械工程,2012,23(1):89-93.
作者姓名:孙冬野  尹燕莉  郝允志  林歆悠  刘永刚
作者单位:重庆大学机械传动国家重点实验室,重庆,400030
基金项目:国家自然科学基金资助项目,重庆市科技攻关计划资助项目,中央高校基本科研业务费资助项目
摘    要:为避免回流式无级变速器在无级与回流工况转换过程中动力中断,以减小对整车冲击度的影响,提出了回流式无级变速器动力连续转换的控制策略。针对转换过程中变速器效率和金属带功率流方向变化对输出转矩的影响,建立了转换过程中离合器接合、分离的动力学模型,确定了离合器扭矩变化率的限定范围。利用MATLAB/Simulink仿真平台,对回流-无级和无级-回流转换过程进行了仿真研究,结果表明:采用回流式无级变速器动力连续转换的控制策略,冲击度控制在5m/s3以内。

关 键 词:汽车  无级变速传动  离合器  控制策略

Continuous Power Shift Control Strategy of Continuously Variable Transmission System with Reflux Power
Sun Dongye Yin Yanli Hao Yunzhi Lin Xinyou Liu Yonggang.Continuous Power Shift Control Strategy of Continuously Variable Transmission System with Reflux Power[J].China Mechanical Engineering,2012,23(1):89-93.
Authors:Sun Dongye Yin Yanli Hao Yunzhi Lin Xinyou Liu Yonggang
Affiliation:Sun Dongye Yin Yanli Hao Yunzhi Lin Xinyou Liu Yonggang The State Key Lab of Mechanical Transmissions,Chongqing University,Chongqing,400030
Abstract:In order to avoid power loss of continuously variable transmission system with reflux power and reduce vehicle jerk,a continuous power shift control strategy of continuously variable transmission system with reflux power was put forward.Aimed at shifting process,transmission efficiency and the opposite direction of continuously variable unit had impact on transmission output torque,a dynamics model of clutch engagement and disengagement course was established,and the range of clutch torque change ratio was calculated.Taking MATLAB/Simulink as the platform,simulation study of shifting process was carried out,the results indicate that jerk is less than 5m/s3 by adopting continuous power shift control strategy of continuously variable transmission system with reflux power.
Keywords:vehicle  continuously variable transmission  clutch  control strategy
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号