首页 | 本学科首页   官方微博 | 高级检索  
     

高炉渣铁的脱硫试验
引用本文:辛启斌,李宏光,何奖爱,林章,于小双.高炉渣铁的脱硫试验[J].现代铸铁,2009(2).
作者姓名:辛启斌  李宏光  何奖爱  林章  于小双
作者单位:1. 东北大学材料与冶金学院,辽宁,沈阳,110004
2. 龙源实业有限公司,辽宁,凌源,122500
摘    要:对w(S)量高、w(Si)和w(Mn)量低的高炉渣铁进行脱硫试验,结果显示:渣铁温度控制在1420~1460℃,加入3%的脱硫剂(成分为85%石灰+10%萤石+5%石墨),脱硫时间为10min时,脱硫效果达到最佳。用该工艺生产普通灰铸铁件,试样的基体组织为珠光体+铁素体,抗拉强度为195MPa,布氏硬度为223HB,满足低牌号灰铸铁的性能要求。

关 键 词:高炉渣铁  脱硫剂  脱硫效果

An Investigation on Desulphurizing of Blast Furnace Slag-Iron Mixture Melt
XIN Qi-bin,LI Hong-guang,HE Jian-gai,LIN Zhang,YU Xiao-shuang.An Investigation on Desulphurizing of Blast Furnace Slag-Iron Mixture Melt[J].Modern Cast Iron,2009(2).
Authors:XIN Qi-bin  LI Hong-guang  HE Jian-gai  LIN Zhang  YU Xiao-shuang
Affiliation:2(College of Materials and Metallurgy; North-East University; Shenyang 110004; China; 2.Longyuan Industry Co.Ltd.; Lingyuan 122500; China);
Abstract:An investigation on desulphurizing of blast furnace slag-iron mixture melt with high S content and low Si,low Mn contents was conducted.The result showed that the best desulphurizing effect was obtained when the slag-iron mixture melt temperature was kept between 1 420~1 460 ℃,desulphurizing agent consisted of 85% lime +10% fluorite +5% graphite and its adding amount was 3%.Above mentioned process was used to produce the normal gray iron,the matrix structure of specimen was of pearlite + ferrite,and its ten...
Keywords:blast furnace slag-iron mixture melt  desulphurizing agent  desulphurizing effect
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号