| 填料形态及加工工艺与氟橡胶拉伸性能关系 |
| |
| 引用本文： | 陈军,倪海鹰,张旭刚.填料形态及加工工艺与氟橡胶拉伸性能关系[J].特种橡胶制品,2004,25(3):17-19. |
| |
| 作者姓名： | 陈军 倪海鹰 张旭刚 |
| |
| 作者单位： | 1. 四川大学,高分子材料科学与工程学院,四川,成都,610065
2. 四川航天烽火胶管工业有限公司,四川,温江,611130 |
| |
| 摘 要： | 研究了2种不同形态的填料／FKM体系及加工工艺与混炼胶拉伸性能之间的关系。结果表明：不同形态填料在不同的混炼工艺条件下对氟橡胶混炼胶影响反映在不同的方面，对于高纵横比的填料而言，混炼工艺的改变将对混炼胶的拉伸性能产生一定影响，但填料对混炼胶不能进行增强；氟橡胶／球形填料体系则对工艺条件的依赖不大。
|
| 关 键 词： | 镁盐晶须 中空玻璃微珠 FKM 拉伸性能 填料形态 加工工艺 氟橡胶 混炼 |
| 文章编号： | 1005-4030(2004)03-0017-02 |
| 修稿时间： | 2004年2月18日 |
Influence of Shapes of Filler and Processing Technology on the Tensile Property of Fluoro-Rubber |
| |
| CHEN Jun,NI Hai-ying,ZHANG Xu-gang.Influence of Shapes of Filler and Processing Technology on the Tensile Property of Fluoro-Rubber[J].Special Purpose Rubber Products,2004,25(3):17-19. |
| |
| Authors: | CHEN Jun NI Hai-ying ZHANG Xu-gang |
| |
| Affiliation: | CHEN Jun~1,NI Hai-ying~1,ZHANG Xu-gang~2 |
| |
| Abstract: | The influence of mixing technology and the types of the filler on the tensile property of FKM rubber was studied.The results showed that under different mixing technology ,the influence of type of filler on the property of FKM rubber was different:to the high fiber aspect ratio,the changes of the mixing technology would affect the tensile strength obviously,but with no reinforcing effects;the tensile strength would depend on the technology slightly. |
| |
| Keywords: | magnesium-salt crystal whisker hollow glass bead fluoro-rubber tensile strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
