Structural and electrical properties of Sb-doped p-type ZnO thin films fabricated by RF magnetron sputtering

We investigated the Sb-doping effects on ZnO thin film using RF (radio frequency) magnetron sputtering and RTA (rapid thermal annealing). The structural and electrical properties of the thin films were measured by X-ray diffraction, SEM (scanning electron microscope), and Hall effect measurement. Thin films were deposited at a high temperature of 800°C in order to improve the crystal quality and were annealed for a short time of only 3 min. The structural properties of undoped and Sb-doped films were considerably improved by increasing oxygen content in the Ar-O₂ gas mixture. Sb-doping also significantly decreased the electron concentration, making the films p-type. However, the crystallinity and surface roughness of the films degraded and the mobility decreased while increasing Sb-doping content, likely as a result of the formation of smaller grain size. From this study, we observed the transition to the p-type behavior at 1.5 at.% of Sb. The thin film deposited with this doping level showed a hole concentration of 4.412?×?10¹⁷ cm^?3 and thus is considered applicable to p-type ZnO thin film.