| Abstract: | This paper presents the effects of solid loading on the performance of a cyclone with pneumatic extraction of solids. The cyclone is a non‐conventional design, especially used for hot‐gas cleaning applications such as pressurized fluidized bed combustors (PFBC). A scaled‐down cold‐flow model was employed for the research. Experiments were conducted at 9–14 m/s inlet gas velocities, inlet solid loadings ranging from 30 to 230 g/kg gas, and bottom gas extraction percentages from 0.3 to 1.5%. Experimental results of pressure drop resistance coefficients and collection efficiency were compared with literature predictions. At PFBC operating conditions, cyclone geometry and solid concentration are the main parameters influencing cyclone pressure drop and collection efficiency. The vortex penetration in dipleg causes lower pressure drop values and higher collection efficiencies than predicted. These parameters can be suitably predicted for PFBC cyclones by introducing a modified penetration length in Muschelknautz's model 1]. For the present cyclone design, a new correlation of pressure drop, including the influence of solid loading, is proposed. A new method for detecting cyclone fouling, not previously addressed, is also presented, based on the evolution of the pressure drop resistance coefficient. An enhanced separation efficiency has been found, related to collection efficiency, which is especially important for particle sizes below 10 μm revealing agglomeration effects. |
