| 金属熔丝增材制造技术的研究现状与展望 |
| |
| 引用本文： | 王钰,王凯,丁东红,卢清华,易江龙.金属熔丝增材制造技术的研究现状与展望[J].电焊机,2019,49(1):69-77,123. |
| |
| 作者姓名： | 王钰 王凯 丁东红 卢清华 易江龙 |
| |
| 作者单位： | 佛山科学技术学院机电工程学院,广东佛山528225;广东省焊接技术研究所(广东省中乌研究院),广东广州510070;佛山科学技术学院机电工程学院,广东佛山,528225;广东省焊接技术研究所(广东省中乌研究院),广东广州,510070 |
| |
| 基金项目： | 国家自然科学基金;国家自然科学基金;广东省科技计划 |
| |
| 摘 要： | 随着现代计算机技术的快速发展,增材制造技术在诸多工业领域得到了广泛应用,逐渐成为智能制造技术的典型代表。其中,金属熔丝增材制造由于其成形效率高、成本低、材料利用率高等优势,已逐渐成为国内外增材制造研究的热点。介绍了金属熔丝增材制造技术的分类、应用范围、各自的优缺点和研究现状,重点讨论电弧熔丝增材制造技术的细分领域现状及应用,分析金属熔丝增材制造技术的未来研究目标与发展趋势。
|
| 关 键 词： | 增材制造 丝材 金属材料 综述 |
Research status and prospect of metal wire additive manufacturing technology |
| |
| WANG Yu,WANG Kai,DING Donghong,LU Qinghua,YI Jianglong.Research status and prospect of metal wire additive manufacturing technology[J].Electric Welding Machine,2019,49(1):69-77,123. |
| |
| Authors: | WANG Yu WANG Kai DING Donghong LU Qinghua YI Jianglong |
| |
| Affiliation: | (School of Mechatronics Engineering,Foshan University,Guangzhou 528225,China;E.O.Paton Chinese-Ukrainian Institute of Welding,Guangzhou 510070,China) |
| |
| Abstract: | With the rapid development of modern computer technology,the additive manufacturing(AM)technology which is different from traditional manufacturing processes has been widely used in many industrial fields,which has gradually become the typical representative of intelligent manufacturing technology.Among those AM technologies,the metal wire additive manufacturing(MWAM)has gradually become the focus of AM research worldwide due to its advantages of high deposition rate,low cost and high material utilization rate.This paper introduces the classification,the application range,the advantages and disadvantages of MWAM as well as its current research state.The study focused on the current development and application of MWAM technology,and then the future research goals and trends are also discussed. |
| |
| Keywords: | additive manufacturing wire metallic material review |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
