| 面向快速制造的硅橡胶模具计算机辅助设计研究 |
| |
| 引用本文： | 贾玉玺,薛淑霞,孙胜,王广春,赵国群.面向快速制造的硅橡胶模具计算机辅助设计研究[J].山东大学学报(工学版),2002,32(2):131-135. |
| |
| 作者姓名： | 贾玉玺 薛淑霞 孙胜 王广春 赵国群 |
| |
| 作者单位： | 250061,山东省,济南市,山东大学,材料科学与工程学院 |
| |
| 基金项目： | 教育部优秀年轻教师基金资助 |
| |
| 摘 要： | 应用面向制造的设计方法开展了快速硅橡胶模具的计算机辅助设计研究 ,分析并协调了设计过程中的制造约束 ,优化了面向快速制造的硅橡胶模具的计算机辅助设计过程 ,并在实现了计算机辅助设计与计算机辅助工程的过程集成的基础上 ,研究了尺寸补偿、分型方向确定及分型面设计、脱模斜度选取、浇口设计等相关的若干关键技术
|
| 关 键 词： | 硅橡胶 计算机辅助设计 最佳化/面向制造的设计 |
| 文章编号： | 1000-5323(2002)02-0131-05 |
| 修稿时间： | 2001年12月6日 |
RESEARCH ON COMPUTER-AIDED DESIGN OF SILICONE RUBBER MOLD FOR RAPID MANUFACTURING |
| |
| JIA Yu xi,XUE Shu xia,SUN Sheng WANG Guang chun,ZHAO Guo qun.RESEARCH ON COMPUTER-AIDED DESIGN OF SILICONE RUBBER MOLD FOR RAPID MANUFACTURING[J].Journal of Shandong University of Technology,2002,32(2):131-135. |
| |
| Authors: | JIA Yu xi XUE Shu xia SUN Sheng WANG Guang chun ZHAO Guo qun |
| |
| Abstract: | The research on the computer aided design of rapid silicone rubber mold is developed by the method of design for manufacturing, the restrictions related to manufacturing in the design process are analyzed and harmonized, the design process is optimized. On the basis of course integration of computer aided design and computer aided engineering, some key technologies correlative with the concurrent design, such as dimension compensation, parting direction assurance, parting face design, demoulding slop selection, casting nozzle design, are investigated. |
| |
| Keywords: | Silicone rubber Computer aided design Optimization / Design for manufacturing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
