| 啮合同向旋转双螺杆挤出机四面体间隙的研究 |
| |
| 引用本文： | 刘慧,曹达鹏.啮合同向旋转双螺杆挤出机四面体间隙的研究[J].化工学报,1997,48(4):492-497. |
| |
| 作者姓名： | 刘慧 曹达鹏 |
| |
| 作者单位： | 北京化工大学应用数理系,北京化工大学化学工程学院 北京 100029
,北京 100029 |
| |
| 摘 要： | 对啮合同向旋转双螺杆几何学和无间隙全啮合双螺杆四面体间隙的几何形状与体积做了详细的探讨,并建立了四面体间隙的数学模型.澄清了过去对四面体间隙形状的种种推测,为提高双螺杆机械的设计水平提供了较为准确的依据.
|
| 关 键 词： | 四面体间隙 数学模型 高聚物 螺杆挤出机 挤出机 |
STUDY ON TETRAHEDRAL GAP OF INTERMESHING CO-ROTATING TWIN-SCREW EXTRUDER |
| |
| Liu Hui.STUDY ON TETRAHEDRAL GAP OF INTERMESHING CO-ROTATING TWIN-SCREW EXTRUDER[J].Journal of Chemical Industry and Engineering(China),1997,48(4):492-497. |
| |
| Authors: | Liu Hui |
| |
| Abstract: | The geometry of intermeshing co- rotating twin- screw, especially the shape and volume of the tetrahedral gap of the equipment were studied throughly and the mathematical model of the volume of the gap was proposed. The results in this paper clear up a lot of misunderstanding of the shape of the tetrahedral gap and provide a fairly exact model for the design of twin-screw extruders. |
| |
| Keywords: | intermeshing co-rotating twin-screw tetrahedral gap mathematical model cross section curve |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载全文 |
