首页 | 本学科首页   官方微博 | 高级检索  
     

离子束增强沉积CrN镀层膜基结合强度的测定
引用本文:唐宾,胡奈赛,何家文.离子束增强沉积CrN镀层膜基结合强度的测定[J].中国机械工程,2000,11(4):369-372.
作者姓名:唐宾  胡奈赛  何家文
作者单位:1. 太原理工大学
2. 西安交通大学
基金项目:国家自然科学基金资助项目! ( 5 96710 64 )
摘    要:采用球滚接触疲劳法评定不同界面共混工艺所制CrN镀层膜基结合强度,并对试验结果进行分析对比。试验结果表明,在其它参数相同的条件下,随着氨离子轰击能量从10keV、20keV提高到40keV,静反冲共混界面结合强度相应增大,而动反冲共混界面结合强度则有明显降低的趋势,较低能量(10keV、20keV)氨离子动态共混界面具有比其它共混界面更理想的膜基结合强度。

关 键 词:粒子束增强沉积  氮化铬  镀层  结合强度  测定

Bonding Strength Evaluation of IBED CrN Coatings
TANG Bin,HU Naisai,HE Jiawen.Bonding Strength Evaluation of IBED CrN Coatings[J].China Mechanical Engineering,2000,11(4):369-372.
Authors:TANG Bin  HU Naisai  HE Jiawen
Abstract:In this paper, coating/ substrate bonding strength is evaluated by spherical rolling contact fatigue method. The results show that the bonding strength increases with static recoiling interface, but that decreases with dynamic recoiling interface and decreases obviously as the bombarding energy changed from 10keV to 20keV and 40keV.At lower energy of 10keV and 20keV N ions can optimize the bonding strength.
Keywords:IBED    CrN    coating    bonding strength
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号