|
|||||
|
|
| 铸铁件消失模铸造对铁液温度的要求 | |
| 引用本文： | 章舟,李艳明,应根鹏. 铸铁件消失模铸造对铁液温度的要求[J]. 现代铸铁, 2010, 30(6): 41-43. DOI: 10.3969/j.issn.1003-8345.2010.06.008 |
| 作者姓名： | 章舟 李艳明 应根鹏 |
| 作者单位： | [1]杭州学林科技开发服务部,浙江杭州310012 [2]杭州双金机械有限公司,浙江杭州310015 [3]杭州奥宝化工有限公司,浙江310012 |
| 摘 要： | 介绍了采用消失模工艺铸造铸铁件提高浇注温度的原因,其中球铁浇注温度范围为:1380～1480℃,灰铸铁为1360～1420℃,合金铸铁(Cr系白口铁)为1380～1450℃;认为浇注温度过高容易引起粘砂、反喷、气孔等缺陷,浇注温度过低则易引起皱皮、冷隔等缺陷;提出了用消失模工艺生产灰铸铁、球墨铸铁、Cr系白口铸铁对铁液的调整要求。 |
| 关 键 词： | 铸铁 消失模铸造 浇注温度 铁液 |
Iron Melt Requirements for the Lost Foam Iron Castings |
|
| ZHANG Zhou,LI Yan-ming,YING Gen-peng. Iron Melt Requirements for the Lost Foam Iron Castings[J]. Modern Cast Iron, 2010, 30(6): 41-43. DOI: 10.3969/j.issn.1003-8345.2010.06.008 | |
| Authors: | ZHANG Zhou LI Yan-ming YING Gen-peng |
| Affiliation: | 1.Hangzhou Xuelin Science and Technology Development Service Department,Hangzhou 310012,China;2.Hangzhou Shuangjin Machinery Co.Ltd.,Hangzhou 310015,China;3 Hangzhou Aobao Chemical Industry Co.Ltd.,Hangzhou 310012,China) |
| Abstract: | The reason why relatively higher pouring temperature should be adopted for the lost foam iron castings was described.The pouring temperature was as follows：1 380～1 480 ℃ for the nodular iron;1 360～1 420 ℃ for the gray iron;1 380～1 450 ℃ for the Cr-alloyed cast iron（Cr series white cast iron）.Too high pouring temperature is easy to cause defects such as the burn on,metal injection from mold,blowhole,etc.,and however,too low pouring temperature is easy to cause elephant skin and cold shut.The measures to be adopted respectively to adjust the iron melt for production of gray iron,nodular iron and Cr-alloyed white iron proposed. |
| Keywords: | cast iron lost foam casting pouring temperature iron melt |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |