| 攀钢板坯连铸结晶器内流场的水力学模拟研究 |
| |
| 引用本文： | 马范军,文光华,李刚,赵克文,宋国菊,王军,赵启成.攀钢板坯连铸结晶器内流场的水力学模拟研究[J].钢铁钒钛,1999,20(1):11-15. |
| |
| 作者姓名： | 马范军 文光华 李刚 赵克文 宋国菊 王军 赵启成 |
| |
| 作者单位： | [1]重庆大学 [2]攀枝花钢铁公司 |
| |
| 摘 要： | 采用水力学模拟方法研究攀钢板坯连铸结晶器内流场，分析浸入式水口结构尺寸、塞棒吹Ａｒ量和拉速等工艺参数对连铸结晶器内钢液流动状况的影响，在此基础上优选出适合攀钢板坯连铸工艺的浸入工水口结构尺寸及相关参数。
|
| 关 键 词： | 板坯连铸 水力学模拟 结晶器 流场 浸入式水口 |
| 修稿时间： | 1998－11－03) |
WATER MODELLING OF FLUID FLOW PATTERN IN SLAB CONTINUOUS CASTER MOLD AT
PANGANG |
| |
| Ma Fanjun Wen Guanghua Li GangZhao Kewen Song Guoju Wang Jun Zhao,Qicheng.WATER MODELLING OF FLUID FLOW PATTERN IN SLAB CONTINUOUS CASTER MOLD AT
PANGANG[J].Iron Steel Vanadium Titanium,1999,20(1):11-15. |
| |
| Authors: | Ma Fanjun Wen Guanghua Li GangZhao Kewen Song Guoju Wang Jun Zhao Qicheng |
| |
| Affiliation: | Panzhihua Iron & Steel Co. |
| |
| Abstract: | The fluid flow field in the mold of slab
continuous caster at Pangang was investigated by means of water model.The effects of
technical parameters,such as the structure and size of submerged entry nozzle,argon flow rate
through stopper,and casting speed etc ,on the fluid flow pattern in the mold were analyzed.
Based on results obtained,the structure and size of submerged entry nozzle ,and related
technical parameters suitable for slab continuous casting process were optimized. |
| |
| Keywords: | slab continuous casting water model mold flow field submerged entry nozzle |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
