| 不同挤压速度下冷挤压内螺纹振动信号研究 |
| |
| 引用本文： | 梁瑜轩,黎向锋,左敦稳,张敏.不同挤压速度下冷挤压内螺纹振动信号研究[J].中国机械工程,2012,23(7):840-843. |
| |
| 作者姓名： | 梁瑜轩 黎向锋 左敦稳 张敏 |
| |
| 作者单位： | 南京航空航天大学,南京,210016 |
| |
| 基金项目： | 空装“十一五”预研项目 |
| |
| 摘 要： | 研究了在不同挤压速度下,冷挤压内螺纹振动信号的变化规律,进而从振动信号方面解释不同挤压速度对冷挤压内螺纹的挤压扭矩的影响。研究结果表明,随着挤压速度的增大,挤压丝锥的振动也相继增大,振动信号的频率从低频向高频移动,振动信号能量主要分布在625～1250Hz范围内,且在振动信号中,该频率所占的能量越多,越有利于挤压扭矩的减小。
|
| 关 键 词： | 冷挤压内螺纹 挤压速度 振动信号 信号分析 |
Research on Vibration Signals of Internal Thread Formed by Cold Extrusion under Different Extrusion Speeds |
| |
| Liang Yuxuan Li Xiangfeng Zuo Dunwen Zhang Min.Research on Vibration Signals of Internal Thread Formed by Cold Extrusion under Different Extrusion Speeds[J].China Mechanical Engineering,2012,23(7):840-843. |
| |
| Authors: | Liang Yuxuan Li Xiangfeng Zuo Dunwen Zhang Min |
| |
| Affiliation: | Liang Yuxuan Li Xiangfeng Zuo Dunwen Zhang Min Nanjing University of Aeronautics and Astronautics,Nanjing,210016 |
| |
| Abstract: | The vibration signals of internal thread formed by cold extrusion under different extrusion speeds were researched.So the impacts of torque of internal thread formed by cold extrusion under different extrusion speeds can be explained by vibration signals.The results show that,as the extrusion speed increases,the frequencies of vibration signals move from low frequency to high frequency.The energy of vibration signals are mainly in the range of 625~1250Hz,and the more energy of this freguency range have,the more extrusion torque decrease. |
| |
| Keywords: | internal thread formed by cold extrusion extrusion speed vibration signal signal analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
