| 橡胶材料-增韧氧化锆陶瓷摩擦副磨粒磨损试验研究 |
| |
| 引用本文： | 梁小平,杨正方,刘志锋,李金有,袁启明,高海.橡胶材料-增韧氧化锆陶瓷摩擦副磨粒磨损试验研究[J].润滑与密封,2003(3):39-40,42. |
| |
| 作者姓名： | 梁小平 杨正方 刘志锋 李金有 袁启明 高海 |
| |
| 作者单位： | 天津大学先进陶瓷与加工技术教育部重点实验室,天津,300072 |
| |
| 基金项目： | 教育部科学技术重点项目基金 |
| |
| 摘 要： | 采用销—盘摩擦磨损试验机对聚氨酯橡胶(UR)、丁腈橡胶(NBR)与增韧氧化锆陶瓷(TZC)摩擦副磨粒磨损进行了试验研究。研究结果表明，在同一工况下两种橡胶材料的磨损量都与时间及液相中SiO2含量成正比，且UR较NBR具有更高的抗磨性。本试验结果对石油钻井机械中摩擦副的选材有参考价值。
|
| 关 键 词： | 聚氨酯橡胶 丁腈橡胶 增韧氧化锆陶瓷 销－盘摩擦磨损试验机 磨粒磨损 |
Study on the Abrasive Wear of Rubber Materials-Zirconia Toughened Ceramics |
| |
| Liang Xiaoping Yang Zhengfang Liu Zhifeng Li Jinyou Yuan Qiming Gao Hai.Study on the Abrasive Wear of Rubber Materials-Zirconia Toughened Ceramics[J].Lubrication Engineering,2003(3):39-40,42. |
| |
| Authors: | Liang Xiaoping Yang Zhengfang Liu Zhifeng Li Jinyou Yuan Qiming Gao Hai |
| |
| Abstract: | The abrasion wear of polyurethane rubber (UR) or nitrile butadiene rubber ( NBR) with zirconia toughened ceramics was investigated using a pin-on-disk friction and wear test apparatus. The results showed that on the same conditions the wear capacity of two rubber materials were direct proportional to time and SiO2 content of the solution, and the wear-resistance of UR was better than that of NBR. The results of the test were useful in selecting the material of friction pairs in a drilling machine. |
| |
| Keywords: | Potyurethane Rubber (UR) Pfitrile Butadiene Rubber (NBR) Ceramic Abrasive Wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
