| 喷雾干燥工艺对NiFe_2O_4-10NiO/xM型复合陶瓷粉料特性的影响 |
| |
| 引用本文： | 曹卓远,张雷,祖利国,周科朝.喷雾干燥工艺对NiFe_2O_4-10NiO/xM型复合陶瓷粉料特性的影响[J].粉末冶金材料科学与工程,2010,15(4). |
| |
| 作者姓名： | 曹卓远 张雷 祖利国 周科朝 |
| |
| 作者单位： | 中南大学粉末冶金国家重点实验室,长沙,410083 |
| |
| 基金项目： | 国家重点基础研究发展规划资助项目，国家自然科学创新团队资助项目，国家高技术研究发展计划资助项目 |
| |
| 摘 要： | 采用喷雾干燥工艺制备NiFe2O4-10NiO/xM型复合陶瓷粉料,研究喷雾造粒过程中料浆性能、雾化压力、供料速率等工艺参数对复合陶瓷粉料粒度分布及形貌的影响,并将喷雾造粒与擦筛造粒粉料的压制性能进行对比。结果表明:雾化压力增大,干燥效果更好,粉末粒径随之减小,粒度分布变窄;随着供料速率增大,出口温度逐渐下降,分散效果变差,产品团聚加重。经过3 h球磨,采用料水比为1:1,以及0.4 MPa的雾化压力和10%的供料速率,可获得平均粒度为91μm,松装密度为1.28 g/cm3,流动性为145 s/50 g的球形NiFe2O4-10NiO/xM陶瓷粉料。与擦筛造粒粉料相比,喷雾干燥工艺制备的粉料在200 MPa下成形时,压坯密度提高约3%,压坯强度提高127%。
|
| 关 键 词： | 喷雾干燥 NiFe2O4-10NiO/xM粉末 粒度分布 成形性能 |
Effect of spray drying technology on characteristics of NiFe_2O_4-10NiO/xM composite ceramic powder |
| |
| CAO Zhuo-yuan,ZHANG Lei,ZU Li-guo,ZHOU Ke-chao.Effect of spray drying technology on characteristics of NiFe_2O_4-10NiO/xM composite ceramic powder[J].materials science and engineering of powder metallurgy,2010,15(4). |
| |
| Authors: | CAO Zhuo-yuan ZHANG Lei ZU Li-guo ZHOU Ke-chao |
| |
| Affiliation: | CAO Zhuo-yuan,ZHANG Lei,ZU Li-guo,ZHOU Ke-chao(State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China) |
| |
| Abstract: | NiFe2O4-10NiO/xM composite ceramics powder was prepared by spray drying process.Effects of slurry characteristic,atomizing pressure and feed speed on the particle size distribution and shape of composite ceramics powder were studied.Compact properties of atomized powder and screened granulation powder were compared.The results show that powder diameter decreases and particle size distribution becomes narrow with the increasing of atomizing pressure,the agglomeration of ceramic powder increases with the incr... |
| |
| Keywords: | spray drying NiFe2O4-10NiO/xM powder particle size distribution compact property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
