Computational study of forced convective heat transfer in structured packed beds with spherical or ellipsoidal particles

Randomly packed bed reactors are widely used in chemical process industries, because of their low cost and ease of use compared to other packing methods. However, the pressure drops in such packed beds are usually much higher than those in other packed beds, and the overall heat transfer performances may be greatly lowered. In order to reduce the pressure drops and improve the overall heat transfer performances of packed beds, structured packed beds are considered to be promising choices. In this paper, the flow and heat transfer inside small pores of some novel structured packed beds are numerically studied, where the packed beds with ellipsoidal or non-uniform spherical particles are investigated for the first time and some new transport phenomena are obtained. Three-dimensional Navier–Stokes equations and RNG k–ε turbulence model with scalable wall function are adopted for present computations. The effects of packing form and particle shape are studied in detail and the flow and heat transfer performances in uniform and non-uniform packed beds are also compared with each other. Firstly, it is found that, with proper selection of packing form and particle shape, the pressure drops in structured packed beds can be greatly reduced and the overall heat transfer performances will be improved. The traditional correlations of flow and heat transfer extracted from randomly packings are found to overpredict the pressure drops and Nusselt number for all these structured packings, and new correlations of flow and heat transfer are obtained. Secondly, it is also revealed that, both the effects of packing form and particle shape are significant on the flow and heat transfer in structured packed beds. With the same particle shape (sphere), the overall heat transfer efficiency of simple cubic (SC) packing is the highest. With the same packing form, such as face center cubic (FCC) packing, the overall heat transfer performance of long ellipsoidal particle model is the best. Furthermore, with the same particle shape and packing form, such as body center cubic (BCC) packing with spheres, the overall heat transfer performance of uniform packing model is higher than that of non-uniform packing model. The models and results presented in this paper would be useful for the optimum design of packed bed reactors.