| Al2O3-SiC复相微波衰减材料的性能研究 |
| |
| 引用本文： | 方勇,李晓云,丘泰. Al2O3-SiC复相微波衰减材料的性能研究[J]. 电子元件与材料, 2005, 24(7): 50-52 |
| |
| 作者姓名： | 方勇 李晓云 丘泰 |
| |
| 作者单位： | 南京工业大学材料科学与工程学院,江苏,南京,210009;南京工业大学材料科学与工程学院,江苏,南京,210009;南京工业大学材料科学与工程学院,江苏,南京,210009 |
| |
| 基金项目： | 江苏省高校自然科学基金 |
| |
| 摘 要： | 采用热压烧结工艺制备了Al2O3-SiC复相微波衰减材料。通过网络分析仪,研究了SiC含量对材料的微波衰减性能的影响。结果表明,当w(SiC)<3%,复相材料具有选频衰减的频谱曲线,谐振峰位置基本不变;当w(SiC)为3%~16%,材料的谐振损耗峰向低频方向移动;当w(SiC)>16%时,材料呈现出宽频衰减特性。对复相材料的微波衰减机理作了初步探讨,弛豫损耗和电导损耗是其主要的衰减机理。
|
| 关 键 词： | 无机非金属材料 氧化铝 碳化硅 微波衰减 |
| 文章编号： | 1001-2028(2005)07-0050-03 |
Study on Performance of Al2O3-SiC Composites with Microwave Attenuation Characteristics |
| |
| FANG Yong,LI Xiao-yun,QIU Tai. Study on Performance of Al2O3-SiC Composites with Microwave Attenuation Characteristics[J]. Electronic Components & Materials, 2005, 24(7): 50-52 |
| |
| Authors: | FANG Yong LI Xiao-yun QIU Tai |
| |
| Abstract: | Al2O3-SiC composites with microwave attenuation characteristics were prepared via hot-pressing method. The effect of the content of attenuator SiC on the microwave attenuation characteristics was investigated by network analyzer. The results show that when the content of attenuator SiC is less than 3% the composites represent narrow frequency band attenuation and the resonant peaks don’t move obviously. When the content of attenuator SiC is in the range of 3%～16% the resonant peaks shift to lower frequency. When the content of attenuator SiC is more than 16% the composites show wide frequency band attenuation. The mechanisms of microwave attenuation was discussed, and relaxation loss and conduction loss contribute most to the microwave attenuation. |
| |
| Keywords: | inorganic non-metallic materials alumina silicon carbide microwave attenuation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
