| 超高速注塑机电液系统的分析与仿真研究 |
| |
| 引用本文： | 蔡康雄;文生平;温展飞;金晖.超高速注塑机电液系统的分析与仿真研究[J].中国塑料,2010,24(2):103-108. |
| |
| 作者姓名： | 蔡康雄;文生平;温展飞;金晖 |
| |
| 作者单位： | 华南理工聚合物加工中心 华南理工大学 聚合物加工中心 |
| |
| 摘 要： | 文章通过分析超高速注射液压系统中的比例压力阀，比例流量阀，蓄能器和液压缸的物理结构。建立注射系统的理论数学模型，搭建MATLAB模型并对其进行系统仿真。通过系统的动态特性找到超高速注射速度控制的关键因素。
|
| 关 键 词： | 超高速注射 数学模型 速度控制 仿真 |
| 收稿时间： | 2009-9-16 |
Analysis and Simulation on the Electro-hydraulic System of the Ultra High Speed Injection Molding Machine |
| |
| Abstract: | This article develops mathematical models of ultra-speed injects system about injection machine. The mathematical models are established by the proportion delivery valve, the proportion flow valve, the accumulator and the hydraulic carries. Otherwise, the investigation building up the system model and the analyzing dynamic characteristic by MATLAB. In the end of this paper point the key factor of speed control through dynamic characteristic. |
| |
| Keywords: | ultra high speed injection mathematical model inject speed control simulation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
