| 用MK—150／250冷轧机轧制钛棒 |
| |
| 引用本文： | 舒滢,周廉.用MK—150／250冷轧机轧制钛棒[J].稀有金属材料与工程,1999,28(4):240-243. |
| |
| 作者姓名： | 舒滢 周廉 |
| |
| 作者单位： | [1]中南工业大学 [2]西北有色金属研究院 |
| |
| 摘 要： | 对ＭＫ－１５０／２５０冷轧机的四辊组合孔型制法进行了分析和实验研究，设计了用该轧机轧制钛棒的孔型及辅助导板，通过试验得到理想的钛方、矩形棒和圆棒，并对该轧机与肚辊轧机现任中轧制方法的轧件力学性能做了比较和理论分析，说明四辊轧制受力状态对轧件的抗拉强度和延经的影响。
|
| 关 键 词： | 四辊组合孔型 钛棒 宽展系数 冷轧机 轧制 |
Titanium Bars Rolled by the MK 150/250 Cold Rolling Mill |
| |
| Shu Ying,Zhong Jue.Titanium Bars Rolled by the MK 150/250 Cold Rolling Mill[J].Rare Metal Materials and Engineering,1999,28(4):240-243. |
| |
| Authors: | Shu Ying Zhong Jue |
| |
| Abstract: | The rolling process in the 4 roll MK 150/250 cold rolling mill is discussed and analysised. Considered are the pass schedule and the design of the assistant guide plate for Ti bars, ideal square, rectangular and round Ti bars have been obtained. Based on experimental results and theoretical analysis, the influence of rolling load on the tensile strength and elongation of the bars is discussed in detail. |
| |
| Keywords: | 4-roll pass titanium bar spread factor |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
