Low temperature process and thin SBT films for ferroelectric memory devices

Abstract

At crystallization temperatures of about 800°C bismuth layered oxide SrBi₂Ta₂O₉ (SBT) deposited by MOD develops good ferroelectric properties for use in FeRAM devices. But scaling down the film thickness of SBT below 150 nm only shorts are measured at this crystallization temperture after top electrode deposition. Working Pt/SBT/Pt-capacitors are achieved by reducing the crystallization temperature. Also temperatures of 800°C are too high for integration of the SBT module in a stacked capacitor architecture for high density memory devices. Therefore, a process is needed to reduced the crystllization temperature of SBT, called ”Low Temperature Process“.

In this work the electric properties of spin-on processed SBT crystallized in a temperature window from 650°C up to 800°C are investigated. As shown by XRD, transtion of the nonferroelectric Fluorite phase to the Aurivillius phase takes place at approximately 625°C. Increasing the cystallization temperature gives better crystaallized SBT films with bigger SBT graains. However, film prosity is also increasing with temperature. Electrical results of stoichiometric variations of SBT are presented. SEM pictures show that cluster formation is correlated with less film porosity at lower temperatures.