首页 | 本学科首页   官方微博 | 高级检索  
     

空间用FM08系列熔断器漏率研究与仿真分析
引用本文:徐晓宇,吕从民,党炜,高宜桂.空间用FM08系列熔断器漏率研究与仿真分析[J].真空,2010,47(1).
作者姓名:徐晓宇  吕从民  党炜  高宜桂
作者单位:1. 中国科学院光电研究院,北京,100190;中国科学院研究生院,北京,100049
2. 中国科学院光电研究院,北京,100190;中国科学院空间科学与应用总体部,北京,100190
3. 中国科学院空间科学与应用总体部,北京,100190
摘    要:为保证空间用FM08系列熔断器在规定的任务时间内不因密封原因失效,必须制定合理的漏率指标。本文从漏孔的气流特性出发,研究并建立了FM08系列熔断器真空泄漏数值模型。在此基础上,对允许漏率、气体压力等进行了数值仿真分析,得出了不同任务周期下FM08允许漏率指标,该结果与NASA研究结果基本一致,验证了仿真模型的正确性。本文研究结果对航天工程确定FM08系列熔断器的密封性要求具有实际指导作用。

关 键 词:熔断器  漏率  仿真

Research and simulation analysis of leakage rate of FM08-series fuses for spatial use
XU Xiao-yu,LV Cong-min,DANG Wei,GAO Yi-gui.Research and simulation analysis of leakage rate of FM08-series fuses for spatial use[J].Vacuum,2010,47(1).
Authors:XU Xiao-yu    LV Cong-min    DANG Wei  GAO Yi-gui
Affiliation:XU Xiao-yu1,2,LV Cong-min1,3,DANG Wei1,GAO Yi-gui3(1.Academy of Opto -Electronics,Chinese Academy of Sciences,Beijing 100190,China,2.Graduate University of Chinese Academy of Sciences,Beijing 100049,3.General Establishment of Space Science , Application,Chinese Academy of Science,China)
Abstract:To ensure FM08-series fuses for spatial use without failure due to leakage during prescribed time,a reasonable leakage rate must be determined.Based on the characteristics of airflow,a numerical simulation model of the fuses was developed to analyze the internal pressure and possible leakage rates and,as a result,the allowable leakage rates of FM08-series fuses were obtained for different prescribed time that are required to implement specified tasks.The simulation results basically conform with NASA resear...
Keywords:FM08
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号