| 进气温度与压力对锥形涡流管性能的影响 |
| |
| 引用本文： | 昌锟,周刚,李青,李强. 进气温度与压力对锥形涡流管性能的影响[J]. 低温工程, 2011, 0(2): 39-43 |
| |
| 作者姓名： | 昌锟 周刚 李青 李强 |
| |
| 作者单位： | 中国科学院理化技术研究所低温工程学重点实验室;中国科学院研究生院; |
| |
| 基金项目： | 中国科学院知识创新工程重要方向项目(YYYJ-1004) |
| |
| 摘 要： | 以氮气为工质,对锥形涡流管能量分离特性进行了实验研究,结果表明入口气流温度对锥形涡流管的工作性能影响较小.进气压力越高,能量分离性能越强,不同压力下都在冷气流率约0.2时,可得到最大制冷效应和制冷效率,冷气流率约为0.5时,可获得最大制热效应.升高压力可提高锥形涡流管的能量分离性能,但提高幅度逐渐减小,当压力升高到一定...
|
| 关 键 词： | 锥形涡流管 温度 压力 性能 |
Effect of inlet parameters on energy separation for divergent vortex tube |
| |
| Chang Kun,Zhou Gang,Li Qing,Li Qiang. Effect of inlet parameters on energy separation for divergent vortex tube[J]. Cryogenics, 2011, 0(2): 39-43 |
| |
| Authors: | Chang Kun Zhou Gang Li Qing Li Qiang |
| |
| Affiliation: | Chang Kun1,2 Zhou Gang1 Li Qing1 Li Qiang1(1Key Laboratory of Cryogenics,Technical Institute of Physics and Chemistry,Chinese Academy of Sciences,Beijing 100190,China)(2Graduate School of Chinese Academy of Sciences,Beijing 100049,China) |
| |
| Abstract: | Experiments were carried out to investigate the influence of inlet parameters on energy separation of divergent vortex tube by using nitrogen as working fluid.The experiment results show that the temperature of inlet flow has slight effect on the energy separation performance of divergent vortex tube.The experiments present that higher inlet pressure helps to obtain higher energy separation performance.The highest cooling effect and cooling efficiency is available at cold mass fraction of about 0.2.Comparat... |
| |
| Keywords: | divergent vortex tube temperature pressure performance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
