| 钢构件表面涂层结合强度的研究 |
| |
| 引用本文： | 丁泽良,杨鹏,汤迎红,黄守辉.钢构件表面涂层结合强度的研究[J].金属材料与冶金工程,2010,38(1):3-7. |
| |
| 作者姓名： | 丁泽良 杨鹏 汤迎红 黄守辉 |
| |
| 作者单位： | 湖南工业大学机械工程学院,湖南,株洲,412008 |
| |
| 基金项目： | 湖南省自然科学基金项目 |
| |
| 摘 要： | 对影响涂层结合强度的涂层厚度、涂层种类、表面预处理方式等因素进行了综合评述，并就喷砂处理的喷射角、磨料粒度和工作气压等参数对涂层结合强度的影响进行了实验研究。结果表明：适当增大磨粒直径、工作气压和喷射角度，均能增大基体表面粗糙度，明显提高涂层结合强度。
|
| 关 键 词： | 钢构件 结合强度 涂层 喷砂 |
Study on the Bond Strength of Surface Coating and Steel Members |
| |
| DING Ze-liang,YANG Peng,TANG Ying-hong,HUANG Shou-hui.Study on the Bond Strength of Surface Coating and Steel Members[J].Metal Materials And Metallurgy Engineering,2010,38(1):3-7. |
| |
| Authors: | DING Ze-liang YANG Peng TANG Ying-hong HUANG Shou-hui |
| |
| Affiliation: | (School of Mechanical Engineering, Hunan University of Technology, Zhuzhou 412008, China) |
| |
| Abstract: | The bond strength of surface coating and steel members is an important target of coating quality. In this paper, the effect of coating thickness, coating type, and surface pretreatment on the bond strength were reviewed. The experimental investigations of the effects of spraying angle, abrasive dimension and working air pressure and so on parameter on the bond strength were carried out. The results showed that, suitably to broaden abrasive dimension, working air pressure and spraying angle have been able to increase face coarseness of the base, and obviously to raise bond strength of surface coating and steel members. |
| |
| Keywords: | steel members bond strength coating sand blasting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
