首页 | 本学科首页   官方微博 | 高级检索  
     

聚合磷酸钙骨水泥的制备和性能研究
引用本文:何菁萍,王明玺,张昭.聚合磷酸钙骨水泥的制备和性能研究[J].四川大学学报(工程科学版),2001,33(2):43-46.
作者姓名:何菁萍  王明玺  张昭
作者单位:四川大学 化学工程系,
摘    要:采用丙烯酸和衣康酸的共聚物与自制磷酸钙粉末反应制备骨水泥。用自凝牙托水对类磷酸四钙(TTCP)粉末进行表面改性后所制备的骨水泥,初凝时间为4.5min,终凝时间为8.5min,抗压强度可达42MPa。采用类TTCPα-磷酸三钙的混合粉料制备的骨水泥,初凝时间为5.5min,终凝时间为11.0min,抗压强度可达43MPa。

关 键 词:聚合磷酸钙骨水泥  骨修复材料  凝结时间  抗压强度  制备  性能
文章编号:1009-3087(2001)02-0043-04
修稿时间:2000年2月28日

Preparation and Properties of Polymeric Calcium Phosphate Cement
HE Jing-ping,WANG Ming-xi,ZHANG Zhao.Preparation and Properties of Polymeric Calcium Phosphate Cement[J].Journal of Sichuan University (Engineering Science Edition),2001,33(2):43-46.
Authors:HE Jing-ping  WANG Ming-xi  ZHANG Zhao
Abstract:Polymeric calcium phosphate cement is a new type of bioactive materials used in bone prostheses. In the study the cement was derived from mixing copolymer of acrylic acid and itaconic acid with the powder of calcium phosphate. The compressive strength of the cement is enhanced up to 42 MPa after surface modification of TTCP-like powder by MMA. Its initial setting time is 4.5 min and final setting time is 8.5 min.For the cement by powder mixture of α-TCP and TTCP-like, its compressive strength reaches 43 MPa, its initial setting time is 5.5 min and its final setting time is 11.0 min.
Keywords:polymeric calcium phosphate cement  implant materials of bone  setting time  compressive strength  preparation  property
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号