首页 | 本学科首页   官方微博 | 高级检索  
     

纳秒双脉冲激光的控制方法
引用本文:王学军,孟繁禹,李猛,王静波,高光波.纳秒双脉冲激光的控制方法[J].中国激光,2011(2).
作者姓名:王学军  孟繁禹  李猛  王静波  高光波
作者单位:中国航空工业集团公司北京航空制造工程研究所;
基金项目:航空科学基金(2008ZE25006)资助课题
摘    要:研究了用于航空发动机涡轮叶片气膜孔加工的双脉冲激光控制方法。报道了采用两台闪光灯抽运的电光调Q激光器偏振组束产生100 ns左右时间间隔的双脉冲激光的实验结果。共轴的双脉冲激光的时间间隔可以在零到几百纳秒之间自由调节。双脉冲最大相对定时抖动小于5 ns。双脉冲激光器的重复频率40 Hz,双脉冲能量大于400 mJ。

关 键 词:激光技术  双脉冲激光  偏振组束  定时抖动  触发延迟  

Nanosecond Dual Pulse Laser Controlling Method
Wang Xuejun Meng Fanyu Li Meng Wang Jingbo Gao Guangbo.Nanosecond Dual Pulse Laser Controlling Method[J].Chinese Journal of Lasers,2011(2).
Authors:Wang Xuejun Meng Fanyu Li Meng Wang Jingbo Gao Guangbo
Affiliation:Wang Xuejun Meng Fanyu Li Meng Wang Jingbo Gao Guangbo(Beijing Aeronautical Manufacturing Technology Research Institute,Aviation Industry Corporation of China,Beijing 100024,China)
Abstract:Double-pulse laser controlling method used for film cooling holes processing of aircraft engine turbine blade is studied.Double-pulse laser experimental results of producing approximately 100 ns temporal delay between the pulses with polarization beam combining by two sets of flash-lamp pumped electrooptical Q-switched laser are reported.The interval of co-aligned double-pulse laser can be turned freely from 0 to several hundred nanoseconds.The maximal timing jitter of double-pulse laser is less than 5 ns.T...
Keywords:laser technique  double-pulse laser  polarization beam combination  timing jitter  trigger delay  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号