|
|||||
|
|
| 电力变压器铁心柱截面内油道位置的最优设计——以φ＝650mm为例 | |
| 引用本文： | 司书红,姚西平,裴万胜.电力变压器铁心柱截面内油道位置的最优设计——以φ＝650mm为例[J].自动化与仪器仪表,2010(5):126-128. |
| 作者姓名： | 司书红 姚西平 裴万胜 |
| 作者单位： | 1. 兰州交通大学数理与软件工程学院,甘肃兰州,730070 2. 兰州交通大学土木工程学院,甘肃兰州,730070 3. 中国科学院,寒区旱区环境与工程研究所,甘肃兰州,730000;兰州交通大学土木工程学院,甘肃兰州,730070 |
| 摘 要： | 基于电力变压器铁心柱的制造特点,以铁心柱外接圆直径为φ=650mm为例,根据电力变压器铁心柱截面内油道的设计理论,用两种方法进行了油道的设计计算,通过对计算结果的分析,得到了电力变压器铁心柱截面内油道位置的优化设计结果。 |
| 关 键 词： | 变压器 铁心柱 油道 优化设计 分圆法 |
Oil Ducts Optimization Design on the Iron Beam Sectional of the Electricity Transformer |
|
| SI Shu-bong,YAO Xi-ping,PEI Wan-sheng.Oil Ducts Optimization Design on the Iron Beam Sectional of the Electricity Transformer[J].Automation & Instrumentation,2010(5):126-128. | |
| Authors: | SI Shu-bong YAO Xi-ping PEI Wan-sheng |
| Affiliation: | SI Shu-hong, YAO Xi-ping, PEI Wan-sheng |
| Abstract: | Based on the manufacturing features of the power transformer of Iron beam sectional,Take Iron beam sectional circumscribed circle diameter as an example, depending on the power transformer iron beam sectional of oil ducts design theory, give two methods for the design and calculation of oil ducts, use the distance analysis, got optimal design of oil ducts within the Iron beam cross- section of power transformer. |
| Keywords: | Power transformer Iron beam sectional Oil ducts Optimization design Method of divide circle |
| 本文献已被 维普 万方数据 等数据库收录！ | |