| 消失模铸渗工艺及组织性能的研究 |
| |
| 引用本文： | 张冉阳,陈跃,杜三明,铁喜顺.消失模铸渗工艺及组织性能的研究[J].铸造设备研究,2005(5):25-27. |
| |
| 作者姓名： | 张冉阳 陈跃 杜三明 铁喜顺 |
| |
| 作者单位： | 河南科技大学材料学院,河南洛阳471003 |
| |
| 基金项目： | 河南省高校杰出科研创新人才工程项目 |
| |
| 摘 要： | 利用消失模铸渗工艺对铸钢表面进行合金化,对铬铁加入量、粘结剂加入量、粒度、铸件模数等因素进行了试验研究,给出了合理的工艺方案.指出渗层与母材之间是良好的冶金结合,渗层硬度由外向内呈下降趋势.
|
| 关 键 词： | 铸渗 消失模铸造 表面合金化 铸钢 |
| 文章编号： | 1004-6178(2005)05-0025-06 |
| 修稿时间： | 2005年7月9日 |
Research on EPC Using Casting Infiltration Process and Structure Properties of Alloyed Layer |
| |
| ZHANG Ran-yang,CHEN Jing-yue,DU San-ming,TIE Xi-shun.Research on EPC Using Casting Infiltration Process and Structure Properties of Alloyed Layer[J].Research Studies On Foundry Equipment,2005(5):25-27. |
| |
| Authors: | ZHANG Ran-yang CHEN Jing-yue DU San-ming TIE Xi-shun |
| |
| Abstract: | Casting steel is alloyed by EPC using casting infiltration process.Some process factors,such as added amount of Cr-Fe and binder,grain size,module of specimen were studied.And the optimum ingredient was obtained.It is indicated that the infiltration lay is metallurgy combined with matrix and its hardness decreased from outside to inside. |
| |
| Keywords: | casting infiltration EPC surface allying casting steel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
