| 基于SAE J1939协议的发动机模拟系统开发 |
| |
| 引用本文： | 韩伟伟,王建,王明玉.基于SAE J1939协议的发动机模拟系统开发[J].国外电子元器件,2009(2):72-74. |
| |
| 作者姓名： | 韩伟伟 王建 王明玉 |
| |
| 作者单位： | 北京航空航天大学交通科学与工程学院; |
| |
| 摘 要： | USBCAN-Ⅱ接口作为总线仪表和PC机的硬件接口，开发基于CAN总线的发动机模拟系统。该系统在C#环境下开发，为了配合总线仪表，模拟发动机的CAN信息发送。该模拟系统可替代真实发动机，不拘于现场测试，在实验室就可完成总线仪表的测试；采用模拟系统测试硬件可避免真实发动机可能出现的损耗故障。
|
| 关 键 词： | SAE J1939 USBCAN-Ⅱ 发动机 汽车 CAN总线 |
Design of engine simulation system based on SAE J1939 protocol |
| |
| HAN Wei-wei,WANG Jian,WANG Ming-yu.Design of engine simulation system based on SAE J1939 protocol[J].International Electronic Elements,2009(2):72-74. |
| |
| Authors: | HAN Wei-wei WANG Jian WANG Ming-yu |
| |
| Affiliation: | School of Transportation Science and Engineering Beihang University;Beijing 100083;China |
| |
| Abstract: | In this paper, the engine simulation system based on CAN bus is developed, which uses USBCAN- Ⅱ as hardware interface between bus instrument and PC.The system is developed in C# environment.To combine with the development of bus instrument.The system sends simulating engine CAN information.The simulation system, as substitute of real engine, can complete test of bus instrument in laboratory but not in field.The simulation system test the hardware that can void loss and fault of real engine. |
| |
| Keywords: | SAEJ1939 USBCAN-II motor auto CAN bus |
| 本文献已被 CNKI 维普 等数据库收录！ |
